The following errata report has been verified for RFC8664, "Path Computation Element Communication Protocol (PCEP) Extensions for Segment Routing".
-------------------------------------- You may review the report below and at: https://www.rfc-editor.org/errata/eid6753 -------------------------------------- Status: Verified Type: Technical Reported by: Shuping Peng <[email protected]> Date Reported: 2021-11-25 Verified by: John Scudder (IESG) Section: 4.3.1 Original Text ------------- If the F bit is set to zero (see below), then the NT field has no meaning and MUST be ignored by the receiver. Corrected Text -------------- If the F bit is set to one (see below), then the NT field has no meaning and MUST be ignored by the receiver. Notes ----- Later it says, when this F bit is set to 1, the NAI value is absent, so the NT field has no meaning. F: When this bit is set to 1, the NAI value in the subobject body is absent. The F bit MUST be set to 1 if NT=0; otherwise, it MUST be set to zero. The S and F bits MUST NOT both be set to 1. -------------------------------------- RFC8664 (draft-ietf-pce-segment-routing-16) -------------------------------------- Title : Path Computation Element Communication Protocol (PCEP) Extensions for Segment Routing Publication Date : December 2019 Author(s) : S. Sivabalan, C. Filsfils, J. Tantsura, W. Henderickx, J. Hardwick Category : PROPOSED STANDARD Source : Path Computation Element Area : Routing Stream : IETF Verifying Party : IESG _______________________________________________ Pce mailing list [email protected] https://www.ietf.org/mailman/listinfo/pce
