Dear Dhruv: Thanks for your comments, here is my reply: Q1: Where is the need for the format flag (uint32, uint16, uint8) coming from? A1: The need of format flag comes from section 4 of draft-yzz-detnet-enhanced-data-plane-00<https://datatracker.ietf.org/doc/draft-yzz-detnet-enhanced-data-plane/>. Since different types of bounded latency information could exist, the format of each type of BLI would be different. That's why we need the format flag in PCEP.
Q2: Is the BLI Type TLV meant for RP objects only? How does this work for stateful PCEP messages where there is no RP object? I assume multiple instances of the TLV with different BLI type is allowed. A2: Currently, it can only be used for RP objects, we will think about the extension for stateful PCEP later. Q3: How does PCE use the Traffic Model Object? Can there be multiple of them? Please clarify these with suitable references to DetNet documents. A3: The Traffic Model Object describes the traffic information model for DetNet that used for deterministic path computation, the content of it is referenced to RFC9016. There is only one Traffic Model Object in a DetNet path computation request. Q4: On one hand, we say BLI are of different formats but in the BLI List TLV and Shared BLI TLV, I see only 32 bits! A4: The format of BLI maybe 8bit, 16bit or 32bit, so we use the maximum of them as the uniform size. Thanks！ Li 发件人: Dhruv Dhody <[email protected]> 发送时间: 2022年7月23日 2:30 收件人: [email protected] 抄送: [email protected] 主题: draft-zhang-pce-enhanced-detnet-00 Hi, Some quick comments... Where is the need for the format flag (uint32, uint16, uint8) coming from? Is the BLI Type TLV meant for RP objects only? How does this work for stateful PCEP messages where there is no RP object? I assume multiple instances of the TLV with different BLI type is allowed. How does PCE use the Traffic Model Object? Can there be multiple of them? Please clarify these with suitable references to DetNet documents. On one hand, we say BLI are of different formats but in the BLI List TLV and Shared BLI TLV, I see only 32 bits! Common comments to both DetNet drafts - - Perhaps it would be a good idea to first list out all the requirements for PCEP. We could then get a confirmation of those requirements from DetNet. I also note that both drafts have different terminology. - PCE WG can then decide the best strategy to encode this, where reusing the existing objects makes sense and where defining a new one would be a better strategy. - We should take the possible RSVP-TE signaling into consideration Hope this helps! Thanks! Dhruv
_______________________________________________ Pce mailing list [email protected] https://www.ietf.org/mailman/listinfo/pce
