Hi, I meant what happens when P=1, F=0 and P=0, F=1 as that's not on the list. Sorry I was not clear!
Thanks! Dhruv On Thu, Oct 30, 2025 at 10:42 AM Samuel Sidor (ssidor) <ssidor= [email protected]> wrote: > Hi Dhruv, > > "Default Behavior (TLV present, no flags set)” is P=0 and F=0. Or am I > missing something? I planned to keep original statement indicating what > should happen if TLV is not included at all, so list is covering only cases > with TLV included. > > Thanks, > Samuel > > *From: *Dhruv Dhody <[email protected]> > *Date: *Thursday, 30 October 2025 at 11:36 > *To: *Samuel Sidor (ssidor) <[email protected]> > *Cc: *[email protected] <[email protected]>, > [email protected] < > [email protected]> > *Subject: *Re: Shepherd Review of > draft-ietf-pce-circuit-style-pcep-extensions > > Hi Samuel, > > On Thu, Oct 30, 2025 at 10:09 AM Samuel Sidor (ssidor) <[email protected]> > wrote: > > > Hi Dhruv, > > > > For “Dhruv: Yes! How about add an additional table to make it extra clear > > and readable (only a minor suggestion) “. > > > > I void like to avoid having table (especially if it is supposed to have > > all combinations to make sure that we will not end up listing all > > combinations in the future if more flags will be added), but I can still > > try to change that section 4.2 to make it more structured, e.g. by > > converting to bullets, what about something like this: > > > > … > > The PATH-RECOMPUTATION TLV defines the recomputation behavior for an LSP > > based on a default rule that can be further restricted by the P and F > > flags, as follows: > > > > - Default Behavior (TLV present, no flags set): The PCE MUST NOT > > recompute the path in response to various triggers if the current path > > remains valid and meets all constraints (E.g. topology updates, > > periodic reoptimization timers, or changes in the state of other LSPs) > _______________________________________________ > Pce mailing list -- [email protected] > To unsubscribe send an email to [email protected] >
_______________________________________________ Pce mailing list -- [email protected] To unsubscribe send an email to [email protected]
