on 10/12/01 6:49 PM, Andrew J Yon III at [EMAIL PROTECTED] wrote:

> in or soldered to it.

In the 7600 , (I have been told) ,  the "chips" configuring   ROM ( Read
Only Memory)   are soldered to the "back side " ( underneath) of the
motherboard (MB) so they can not be seen physically

Not sure of exact location on the 8500 motherboard, but trust me, the ROM
"chips" are there somewhere , as the ROM contains the logic  that initiates
the startup sequence.  Harware is initialized by invoking different
" managers" that reside in ROM. The first, Start Manager which resides in
the Mac OS ROM  verifies all hardware components on the MB are working,
initiates  tests of CPU,ROM,drives,ports,expansion slots and finallly RAM.
The startup chord, or boot tone that indictates this step is successful is
stored  in ROM. Also stored in ROM are the 'tones of death". Etc,..........

If you are posting to this  list with your 8500, then ROM is there!

albert



-- 
PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...

 Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
 -- Sonnet & PowerLogix Upgrades - start at $169   |  & CDRWs on Sale!  |

      Support Low End Mac <http://lowendmac.com/lists/support.html>

PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml>
Send list messages to:   <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:   <mailto:[EMAIL PROTECTED]>
For digest mode, email:  <mailto:[EMAIL PROTECTED]>
Subscription questions:  <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>

Using a Macintosh? Get free email and more at Applelinks! 
<http://www.applelinks.com>

Reply via email to