On Monday, August 27, 1956, at 11:10 PM, Richard Miller wrote: > 7500 with 320 megs of ram.OS8.1, Virtual memory turned off. 200mhz 604e > processor. there is a laser writer II NT mated by the printer port and > my > ethernet is connected for my internet. The scanner is connected by a 25 > pin > cable from the mac to the scanner. The scanner has power and I have > installed the software from umax. I have tried different scsi addresses > and > that does not work. > > Any insight would be appreciated
Use SCSIProbe to see if the device is even seen by the computer: <http://www.versiontracker.com/moreinfo.fcgi?id=3935&db=mac> If it says no devices seen on the SCSI bus (except the host controller and hard drive), then you've probably got a bum scanner or a bum SCSI port. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
