On Tuesday, May 21, 2002, at 10:46 AM, Douglas Hawkins wrote: > BEING new to the MAC line, does anyone have a link or > something where I can read about PRAM and all. I am > out of my league in trying to troubleshoot a G3 with > two printers hooked up to it and one through the Modem > port. One printer worked,( the one that went through > the Modem Port) I Disabled appletalk and got one to > work,( through the Printer Port) but the other wont. > THEN When I renabled apple talk, NEITHER printer would > work!!!!!! ARGH! .......
Resetting PRAM (along with Rebuilding the Desktop) are some of the most over-used troubleshooting steps. Resetting PRAM might help (reboot, hold down cmd-opt-P-R for 3 chimes), but most likely not. What kinds of printers are these? What port is AppleTalk set to use? Is there an internal modem in the computer? -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
