It was set as master. It worked fine in the B&W G3 using the same card but for some reason it just wouldn't mount in OS 9.1 on the 7300. In the end I sent it back. I spoke to the tech guy for Acard and he couldn't figure it out as well. I think they never really tested it on anything besides a G3 and up machine. Thanks for the help.
on 7/6/02 1:42 AM, Charlie Reyes at [EMAIL PROTECTED] wrote: > A. Tuazon wrote: > > [snip] >> >> I know the drive works, I know the cable works, and I know the IDE >> controller card works. So what the heck am I doing wrong? The 7300/200 >> just won't mount the drive. Could it be that I formatted it in my G3 so my >> 7300 doesn't like that? Could it be conflicting SCSI addresses (the Apple >> profiler lists the card as SCSI -- though it handles IDE drives only)? >> >> I checked the ACARD website and I even installed the new firmware but all >> I'm getting is zilch on the 7300. >> > > > Was your IDE drive set as master or slave (it should be jumpered as master)? > > Charlie > > -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
