-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Wednesday, July 10, 2002 8:15 AM To: PCI PowerMacs Subject: Re: SCSI-1 or SCSI-2, Yamaha 8X4X24 <In this specific case, the 25-pin D-Sub went directly to the Mac, and the 50-pin Amphenol went either to the next device in the (external) device chain, or a terminator was installed there.> You mean the HD-50 male went to SCSI-1 and DB-25 male went to the PM7500 if I don't have any other device in the chain? On the back of the burner I also saw ID setting swicht and terminator on/off swicht, so the SCSI-2 connector is used for what? -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
