Many thanks to Kevin and the rest of you that offered suggestions to get my Mac running again. I found the cuda button, but it did not help. By the way, what is the correct way to reset the cuda? Since the button is within the computer will it reset with the power off, or are you supposed to reach in there with it running???
I will still get a new battery. The picture on the mac guru site is a great help. At least the link to the motherboard will help me become familiar with and identify the goodies within..... At any rate the fix..... I received the new VGA to Mac adapter today. It has a setting for "Plug and Play". I set the dip switches to that setting and the monitor was alive in no time. Now a resolution question. The ENVISION factory setting recommendation appears to be 1280 x 1024, 60 Hz. My only choices in the Monitors control panel, which will list only the "recommended" settings, are 1024 x 768, 75 Hz; 800 x 600, 75 Hz or 640 x 480, 60 Hz. Which is the best to use or is it a matter of visual preference? Thanks again for all your help. Nancy Jennings Stuart, Florida -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
