As you may or may not know, I've been having problems getting OS 9.1 to recognize an 8500 I built, I have OS 8.1 installed on it currently and the Apple System Profiler sees it as an 7600 series. I have been under the assumption that I have an 8500 motherboard but when I looked at the take apart instructions, the part number assigned to the mother board was not the same as the part number on the board. The board shows a part number 820-0752-A, The take apart instructions show part numbers 661-1784 and 661-1153. Can anybody tell me what I've got? (I'm beginning to think that I have a 7600 motherboard, Or a bad 8500 mother board.) One more question: did the 7600 support the same A/V card as the 8500? Thanks in advance.
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
