Hello, I have a PM 7600/120 with an XLR8 G3 300 and 1 GB RAM interleaved running OS 9.2.2. I have two hard drives in this machine on Bus 0: one a Quantum Fireball 1280S (1.2 GB) with SCSI ID of 0, the other a Conner CFP4207S (4 GB) on with a SCSI ID of 1. The Apple CDROM is on Bus 0 as well, ID 3.
Every time I boot, I get the Conner drive loading just fine, bringing up the OS just fine and dandy. But some of the time-roughly half- the Quantum drive just doesn't want to mount. During the times that it doesn't mount, if I restart the Mac, it appears. It only seems to not want to play when booted from a cold start. Again, this behavior is erratic-it doesn't happen all the time. It has been initilized and driver updated, but the issue remains. I have even tried to use SCSI Probe 5.2 to mount it-with no success. When it does play, it reads and writes data without a problem, even boots 7.5.5 if I set it as the boot drive. (And when set as the boot drive, it plays every time.) Outside of living with the scenario-anything anyone suggest I might try to convince Natasha to come out and play? Boris get's lonely by himself . . . Thanks, Troy It sav -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
