Hi Peter, I'm wondering how much of this sled info is relative to my 9500 bays.
I have my active 2 GB -1" HD in the bay just below the floppy DR and the bay below that is empty. I have another Quantum 4.3 GB - 1.6" high but the 50 pin plug on the harness won't reach low enough to plug into it when it's placed in that empty bay (and the 1.6" is too tall already to be raised up enough) The conclusion I've come to is that my presently active 2GB, 1" HD should be in the lower bay but raised up on a sled that I don't have. Then if the 4.3 GB -1.6" is in the bay above, the remaining plug will reach up to it? What's right with this picture? :-) Thanks, Terry -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:pci-powermacs@;mail.maclaunch.com> To unsubscribe, email: <mailto:pci-powermacs-off@;mail.maclaunch.com> For digest mode, email: <mailto:pci-powermacs-digest@;mail.maclaunch.com> Subscription questions: <mailto:listmom@;lowendmac.com> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
