Hi all, This morning, for no apparent reason my ethernet connection stopped working. I have a 7500 connected to a 6200 by x-over ethernet cable. The 6200 has localtalk bridge installed and is connected to a LW320 printer by the printer port. After trying to connect via my AAUI port (with an AAUI/RJ45 adaptor) I unplugged and replugged all the leads to the 6200 and printer which appeared to solve the problem. The only thing a bit odd is that no lights come on by my Ethernet port on my 7500 although it appears to be working now. I have just installed (after the above probs)a 200mhz card and an additiona 128meg DIMM (otal 160meg now) and will upgrade to 8.6 later tonight. I intend to get broaband soon, will I be able to connect to th broadband modem via USB on my 7500 AND Ethernet on my 6200 at the same time?
Thanks James -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:pci-powermacs@;mail.maclaunch.com> To unsubscribe, email: <mailto:pci-powermacs-off@;mail.maclaunch.com> For digest mode, email: <mailto:pci-powermacs-digest@;mail.maclaunch.com> Subscription questions: <mailto:listmom@;lowendmac.com> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
