On 11/8/02 8:20 AM, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> Spew into the Cybertrough:
> I'm trying to re-install 9.1 on my 7600 after a reformat. > When I try to boot from the CD, the computer freezes at > the "welcome to macos" screen. It's been doing this for > about 3 days now while I've tried everyting I could think > of. I've replaced the PRAM battery, pulled/reseated ram, > pulled/reseated PCI cards, Pulled/reseated G3 zif and > finally returned the computer to stock. Each time I get > the freeze at startup. Does anyone have any > suggestions? Remove all PCI cards and external devices. Unplug the machine. Remove the PRAM battery and unplug all the cable leads to the Logic Board. Press in and hold the power on key on the chassis for 5 seconds. Let the machine sit for 30 minutes. Reassemble but leave out all PCI cards and external devices...just Kbd, Monitor and mouse. Hit the CUDA *ONCE* and hold it for 4 seconds. Replace the stock processor. Try to boot from a CD then. -- Kyle H. Hansen -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:pci-powermacs@;mail.maclaunch.com> To unsubscribe, email: <mailto:pci-powermacs-off@;mail.maclaunch.com> For digest mode, email: <mailto:pci-powermacs-digest@;mail.maclaunch.com> Subscription questions: <mailto:listmom@;lowendmac.com> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
