On 11/29/02 1:45 PM, "James S Jones" <[EMAIL PROTECTED]> wrote:
> On Friday, November 29, 2002, at 11:05 AM, Brian A. Rein wrote: > >> On 11/29/02 12:21 PM, "Tim" <[EMAIL PROTECTED]> wrote: >> >>> "Brian A. Rein" wrote: >>> >>>> Does anyone know what switch settings are required to use an >>>> XLR8 Carrier w/Powerforce G3 450/1MB ZIF in a PM7500. >>>> >>>> I have tried over thirty different settings from the XLR8 charts. >>>> I can not get it to run over 300 MHz with a bus speed of 38 MHz. >>> >>> I've never used a Powerforce ZIF. Do they have jumpers on them? >> >> A rotary dial with the settings 0 thru F. > > Doesn't the XLR8 documentation say something about ZIFs with their own > clock settings? Is the Powerforce supported? I know XLR8 is closed, but > OWC bought up most, if not all, of the remaining stock. I believe they > are providing limited troubleshooting assistance. > The manual states that the card can support both fixed and variable speed ZIF's from many manufacturers. It goes on to say that "they" can only assure fully-compatible performance with Apple and XLR8 ZIF's. (Page 21, "G3 & G4 Install & User Manual", revision mi_carrier_102199_C). Brian -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
