In a message dated 11/29/02 1:54:56 PM, [EMAIL PROTECTED] writes: << I have a 250mhz 8600 card a motherboard for the card coming and a 7300 psu will this combo work or will i need a bigger psu to start. >>
Mach5 processors are 250, 300, 350 and 400 MHz; non-Mach5 processors are 233 MHz and under. Here's a double-check ... If your processor card says "Apple High Performance Processor Card Model 1100" on the front (heat sink) side, it is a Mach5 card. And, if so, DON'T plug this card into your 7300 mobo under any circumstances. A bigger PSU is not needed for a 7300 mobo, but a 7300 PSU is. These are suffix "G" PSUs. Earlier PSUs are suffix "B". -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
