Hi all, Installed the 4.5 GB in the 9500 on 9.1.
Drive didn't mount on the desktop. Opened, "Mount Everything" The Drive showed up as installed with ID 4 as planned. Clicked "Mount" The message: "The device is not ready" Opened Apple HD Setup New drive seems to be powering up, spinning beach ball busy, and 4 or 5 "cluck or clack" sounds which then ceased. But only my CD ROM and Boot Disk showed up as installed. � But maybe the 4.5 GB has to be "mounted" before HD Setup lists it?? Next. . . tried "Steadfast" utility. This program seemed the most detailed. Message: "The drive failed to perform a SCSI extended seek command" Test result: Sense Key Info: "Hardware error". Message: "The partition map seems corrupted, do you want to abort the mount attempt?" One thing I did of interest when setting the jumpers was to "enable" "Wait/Spin" which delays the normally immediate powering up of the drive. Maybe shouldn't have enabled this?? Thanks, Terry -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
