Wm Voelker wrote: > Is it possible to install an Apple AV module made for > the 7500/7600 models in a 7300? If so, how difficult > is the process, and is any particular software needed > to make full use of the vid in, etc., capabilities?
First I think you'll need to start with a soldering iron, the proper connector, and a really steady hand........ Or you could swap the motherboard for a 75/7600, along with changing the power supply. Or you could just buy a cheap bare bones 7500 and move everything you already have over to it. -- Alan Miller Underwater Photographer http://home.earthlink.net/~uwphoto/ 9600/233 w/ G3/400 XLR8 ZIF, 1.5 G RAM eBay ID uwphotoer Live each day like it is your last because someday you'll be right. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
