Actually, it does need to be at the end, IF you want a stable SCSI bus, much less work at all. Of course, if you meant (I just realized this might be what you meant) that there can be more cable or ribbon cable after the last device, you are correct.
STeve << I think you're off the mark on this one. Every SCSI bus must have termination at the ENDS of the chain. SCSI busses are terminated at the motherboard (or card) end and you need ONE device attached to it to be terminated which acts as the other "end". I don't think it needs to be physically at the end of the cable. >> -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
