Hello, I've recently replaced the original logic board on a 5260/120 with a 6400/200 one.
I'm very happy with the idea. I'm keeping my all-in-one system, including video/audio-in, TV card, modem,... and, since I've got also a 256k L2 cache card, it's speed has boosted considerably, and allows to place a G3 upgrade. However, I cannot use the PCI slots because there's an obvious "problem of space". The logic board fits below the monitor, leaving a space of about 3 inches for all the cards. In fact, that's enough for the modem, cache card, DIMMs, and rest of the stuff, but the PCI adapter (converting one vertical PCI slot into two horizontal slots) doesn't fit in the space between the LB and the 52xx's monitor. I've got an AVID card that I cannot use because of this reason. I guess a smaller adapter would do it, but, does it exist? Another option would be fitting the LB a bit lower. That seems more difficult, though. Does anyone there know how to solve this problem? Thank you in advance, Javier Nottingham , UK -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
