In a message dated 3/6/03 6:36:49 PM, [EMAIL PROTECTED] writes: << Will other mobo's fit in this case, i.e 8600? >>
The 8500 mobo will fit directly, and you can then upgrade to full A-V, using the 8500's A-V connector. The 8600 will work, too, but you must change the "B" power supply for the "G" power supply, which is really intended for the 7300 but will work with the 8600. Same A-V comments as for the 8500. The "B" power supply has a 22 pin connector and a 10 pin connector; the "G" power supply has a 24 pin connector and a 10 pin connector. The two power supplies are nearly identical, except for the different cable pinouts. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
