Hey Listers (this might be a second appearance... not sure... sorry.)... I'm new to this list, but I'm hoping perhaps one of you has encountered a problem such as the one I am currently experiencing. �
Welllllllll.... after doing much homework, I decided it couldn't hurt to try and upgrade my trusty old 7500/100 with a faster processor and more memory, now that there is new software availabe to make it OSX compatible (when I'm ready). �Plus prices are so low, it's not too painful if it doesn't work out. � But anyway, this weekend I excitedly (but carefully) opened up my Mac, cleaned it (thanks to the 7500 tear down page on LEM) and installed the Sonnet Crescendo PCI G3 500Mhz card, along with two 128MB memory modules, also by Sonnet. �I followed all directions very carefully, and to avoid any weird problems, I powered up the computer with no peripherals attached. � Well, when I pressed the startup button, all I heard was a click. �No tone, no nothing. �Just click. �It sounded very much like when your car's battery is totally dead. �So, I followed Sonnet's trouble-shooting directions and took everything apart again, reseated the new PCI card, took out the oldest memory (I first powered up with ALL of my memory except for the very oldest 8MB chips), and tried again. � Same problem. �I knew not to interleave the memory, but I thought I might have the memory in the wrong slots. �So, I moved the two 128MB modules to B1 and B2 and placed the newest two 32MB modules to B3 and B4 -- nothing else. �This time when I started up, there was a normal start up tone. � But much to my freaked-out-ness, the startup tone was immediately followed by a crashing sound, like glass breaking or a car crash I suppose. �I then put everything back the way it was before (the old 100 MHz card and memory interleaved as it was before, and without the new chips) and the same symptoms occured. � It should also be known that the computer never even had a chance to make a connection with the monitor or something, as nothing ever appeared on the screen except "no signal." �I have since put everything back in the "new" configuration and the car crash sound is still in charge. � So, I'm thinking I either fried my motherboard, the power supply died or I need a new battery. �What do you think??? �I suppose it could also be the hard drive, but I doubt it. �That thing is still pretty new (20GB seagate barracuda installed in October of 2001). � Have you ever seen this happen? �At least this time, my entire computer is backed up. � I hope somebody can help. �I'm afraid to take it to a tech shop, as of yet, as it seems like they always leave you with some new problem and they never really fix the old problems... at least that's how it is in scammy south florida. � thanks! Tamara -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
