>Re: Epson ELP-5700i printer... > >I see that it has a USB (1.x I think) port that isn't quite that obvious >on the back... I assume that the other port is some kind of parallel >port? If so, what kind of adapter would be needed to use the parallel >port with an older non-USB Power Mac (as no donations here are USB 1.x >machines, nor do any have a PCI card with USB 1.x or 2.x ports)?
Since the printer only has USB and parallel ports, AFAIK, there are two ways that it will work with a Mac that has neither (and I know of no Mac that has an OEM parallel port). And, providing there are Mac drivers for this printer. A SCSI to parallel adapter or A router that has print server capabilities and a parallel port. As always, this is just my opinion... -- Fred.... mailto:[EMAIL PROTECTED] -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
