I've just installed a Seagate 9.1 GB Cheetah (10k RPM) in my 9600/350 running 9.2.2. I used an 80 to 50 pin adaptor, and set the jumper (on the drive) to SCSI ID 1 (my hard drive is 0). I initialized the drive using Apple Drive Setup. The problem is, the drive only registers as having 7.9 gigs of space available.
I'm scanning for bad blocks now, but am I missing something obvious?
thanks, -Bill
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
