My Reply follows quote. On 30/07/2003 17:50 [EMAIL PROTECTED] said: >Just repeating my question about what can go in the >top area of a 6400, since I am still unclear. If I >want to put in an internal cd-rw in that scsi spot, >how to get the apeture for cd insertion? > > > If a cd-rw, >> say, >> could go up there, how would one modify the case to >> allow for cd insertion? ------- I have a CD burner in the top bay of a 6500, same case as the 6400. I just leave the bezel off. Not very pretty, but...
If you want it to look pretty, you will have to modify a blank bezel. The best job I have seen (can't remember where) also modified the drive sled by making new holes to move the drive forward far enough to match the outside face of the blank bezel. Careful work and you can make it look good. As far as I know, only blank and Zip Drive bezels were manufactured for the 6400/6500. Ken -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
