I have a G3AIO currently running 10.2. Back when I did the upgrade to about 10.2.3 or 10.2.4, the ColorSync profile would stop being loaded on reboot. The contrast is turned all the way down, so everytime I reboot I have to go to SYSTEM PREFS > DISPLAY > COLOR and go into the calibration utility to turn the contrast back up to full. If I go right back into the calibration util right away, the contrast slider is back at the lowest setting (but the contrast to the picture is still fine). Also recently this mac has stopped keeping time properly so I keep the network time synchronization option enabled now.
I thought all this was due to a dead PRAM battery (the clock not keeping time was the big tipper) so I went and bought a new one. Well the problems have not gone away. I installed the new PRAM battery but the G3 still won't keep time and still won't keep its color settings (contrast and brightness) Is there something else it could possibly be? something i'm missing? James -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
