on 10/21/03 2:32 PM, PCI PowerMacs at [EMAIL PROTECTED] wrote: > Hello again, > First thanks for the hints. I'm inclined to keep the 6500 but there's alway= > s > the 128 ram maximum factor. No problem to add a G3 card but I'm still stuck > with this stupid 128 ram max and the 50mhz bus in both Power Mac.
Germain, that's what I did. Put a 400 CPU in my 6500, added an external 40 gig HD & am quite happy with it. Yes, I only have 128 ram, but since I am not heavy into graphics, I find it quite sufficient. I am thinking of buying a G4 eMachine while they still will run the Classic 9 as well as the X+ & networking the two together. All my peripherals are serial port plug ins, although I do have a Firewire/USB card installed. Don't want to buy new printer, scanner, etc. as I don't use them enough to warrant the expense. Ginny -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
