> From: Norad Ninja <[EMAIL PROTECTED]> > Subject: Re: [PCI] VGA adapter settings
> If you have the 5-cable BNC, then you dont need a sync adapter (that is > what the switch is) because the sync signal will be on the last 2 > cables of the BNC...you just need to get a Rage128 or better for it and > you will be fine. I have another adaptor that has no res switches (I have to put some adaptor fro PC type plug to mac). Wonder what res would come up if I used it? I might bury myself in chords at the back of this desk and have a play one day. You are saying if I had a good card and no res switches in the adaptor I would have available resolution choices in the Monitors control panel? (At present I have only whatever is determined by the little switches in the adaptor - a very happy 1024 x 768 at 74.9Hz). My monitor is something rebadged? The plate at back says Sony Corp, GDM 1961. David Elmo (Bruce! Apologies if I have hijacked your question: reminder folks, Bruce Johnson wants to know more about a Mac-VGA adaptor, no name on it, 4 switches on it. Known is 1-off, 2-off, 3-on, 4-on produces 640x480...) -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
