on 3/16/04 10:44 AM, PCI PowerMacs at [EMAIL PROTECTED] wrote: > >> ...I want to slide a Performa >> 6360 logic board inside a 6300 cabinet, using the power supply of the >> latter. Would that be OK? Any risk involved? The reason is the 6360 >> has a lot of rust, and someone just gave me a look-like-new Performa >> 6300. In the 6360 board there is a Crescendo L2 card and an Ethernet >> PCI card. > > A couple of years ago I slid a 6360 MoBo into a 5200 cabinet and here it is, > still working great!
Hi all; The power supply from the 6300 will run the 6360 board BUT, if the Crescendo L2 card you are speaking of is a G3 upgrade or such, you run a risk of overloading the 6300 power supply. I don't have the exact power specs at hand but, as I own or have owned both models, I do know that the 6360 has a beefier power supply because of the higher speed processor and PCI architecture. HTH --Thanks; Rev. George --Maranatha (means the Lord cometh) -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
