on 11/5/04 7:30 AM, I wrote: > On 30 March I posted the following: >> Twinturbo 128 video card in 9600 shows vertical lines on display. (Attempt to >> re-solder vram chips on board succeeded temporarily; Rube Goldberg fix works >> now with bracket made from spectacle handle between bottom drive bay and >> video card putting tension on board.) What is a permanent fix? > > If anyone is interested, the problem was overcome by re-soldering the 15 > pads where the pins from the video connector terminate on the non-component > side of the board.
Sorry folks, incorrect information above: problem persists, but reappears on cold boot but may be dry-joint related as display improves after several minutes. Maybe Bob is not my uncle after all. - Rex de Nada (Angus) -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
