on 9/26/04 3:56 AM, Paul Hawkins at [EMAIL PROTECTED] wrote: > After installing a MachSpeed G4 ZIF into my beige G3, the sound stops working. > At first the sound > only worked when I plugged in speakers, but now I get nothing. > > I'm running OS X 10.3.5 with 768 megs of RAM and the ZIF card is running at > 400MHZ. > > thanx, > Paul
~~~~~~~~~~~~~~~~~~~~~~ I dunno. I think I'd try all the first-line defenses like: pull the CPU and reseat it. Hit the cuda switch for 30 seconds with the Mac plugged in but turned off. Zap the P-RAM. Rebuild the desktop with the keys command-option-"P"-"R" held down while restarting. Go into the Monitors and Sound control panel and see that the sound's not on "mute" and that the speakers are chosen as the sound outputs and that all sound sliders are up above the bottom marks. If your machine blinks the menu bar at startup the sound is muted or low. MAybe you bumped something installing the G4? Jeff G -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
