>> I used some stuff called 'Gorilla Glue', got it at a local Ace Hardware. >> >> Good stuff!
Appropriate for wood, or any similar porous material which has some water content. It is a polyurethane adhesive (glue) which is not intended for use on plastics. >There is or was a tube glue called "Tarzan's Grip". At least over this part >of the world, Australia. A contact cement. Personally, I have used two part >epoxy for such things, maybe overkill, but feet stay on that way. 3M Super 77 is the best adhesive for the feet. You must thoroughly clean both sides. You must apply a *thin* coat to both sides and let it dry. You must then apply a second *thin* coat to both sides and let it dry. You must ... finally ... press the foot to the cabinet base. One shot. 3M or third-party feet are also good substitutes. There is one common size which is such that two such feet fit perfectly within the space allotted. -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
