2014-06-30 10:44 GMT+02:00 Steve Langridge <[email protected]>: > Hi All,
Hello, > I have two systems, one on 32-bit. the other on 64-bit, both Kubuntu 14.10, > and using a GemPlus 430 card reader. The pcsc-lite packages are :- > > pcscd : 1.8.10-1ubuntu1 > libccid : 1.4.15-1 > libgempc430 : 1.0.7-2 > > Attached are the (colorised) log files from each of the systems. This is just > plugging in the card reader (no card present), and later unplugging it. > > On the 32-bit system, everything is fine, after plugging the reader in, it is > polled (quite quickly) [tx: 01 17, rx: 07 00 00 02 00 00 00 00] > On the 64-bit system, after plugging in the reader, it is polled (at a slower > rate than the 32-bit system), and after about two or three successful polls > [tx: 01 17, rx: 07 00 00 02 00 00 00 00], it no longer receives any replies > [tx: 01 17, rx: nothing]. > > libusb_wrap.c:256:WriteUSB() 003/011: Resource temporarily unavailable > ifdhandler.c:593:IFDHICCPresence() GCCmdCardStatus failed > ifdwrapper.c:348:IFDStatusICC() Card not transacted: 612 > eventhandler.c:313:EHStatusHandlerThread() Error communicating to: GemPC430 00 > 00 > > These errors are sent to the system log all the while the card reader is > plugged in. Because of this, a card can never be recognised when inserted > into the reader, and also the system log gets very large. > > Any one else experiencing this ? You are using an old reader. I wrote this driver more than 10 years ago :-) I would first suspect libusb-0.1. Maybe you can try with libusb-compat + libusb-1.0 Bye -- Dr. Ludovic Rousseau _______________________________________________ Pcsclite-muscle mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pcsclite-muscle
