Il 20/10/2015 18:06, Ludovic Rousseau ha scritto:
That's where I am. Any hint about what's happening or what I could try next ? Buy another model of reader. Choose a reader from the "supported" list https://pcsclite.alioth.debian.org/ccid/supported.html
Ok, done. It works well (I took one from Gemalto). I happen to have also got my hand on this reader (lsusb output appended): http://cartesapuce-discount.com/fr/lecteurs-de-cartes-a-puce-usb/109-lecteur-de-cartes-a-puce-usb-cardman-3121.html pcsc_scan reports "Feitian SCR301", which is on: https://pcsclite.alioth.debian.org/ccid/unsupported.html though it looks like as on my first link, not this one. So far I have had no problem to use it. Do you know how I could test/check the problems mentionned on the page ? On a side note, there are two groups "FEITIAN" and "Feitian" on https://pcsclite.alioth.debian.org/ccid/shouldwork.html , aren't they the same ? best regards, -- Thomas Capricelli <[email protected]> http://www.freehackers.org/thomas/ lsusb output : orzel@berlioz /home/orzel% sudo lsusb -d 0x96e: -v Bus 001 Device 006: ID 096e:0503 Feitian Technologies, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x096e Feitian Technologies, Inc. idProduct 0x0503 bcdDevice 4.50 iManufacturer 1 Feitian iProduct 2 SCR301 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 93 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 200mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 11 Chip/SmartCard bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ChipCard Interface Descriptor: bLength 54 bDescriptorType 33 bcdCCID 1.00 nMaxSlotIndex 0 bVoltageSupport 7 5.0V 3.0V 1.8V dwProtocols 3 T=0 T=1 dwDefaultClock 3700 dwMaxiumumClock 3700 bNumClockSupported 0 dwDataRate 9946 bps dwMaxDataRate 318280 bps bNumDataRatesSupp. 53 dwMaxIFSD 272 dwSyncProtocols 00000007 2-wire 3-wire I2C dwMechanical 00000000 dwFeatures 000404BE Auto configuration based on ATR Auto activation on insert Auto voltage selection Auto clock change Auto baud rate change Auto PPS made by CCID Auto IFSD exchange Short and extended APDU level exchange dwMaxCCIDMsgLen 272 bClassGetResponse echo bClassEnvelope echo wlcdLayout none bPINSupport 0 bMaxCCIDBusySlots 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 24 can't get debug descriptor: Resource temporarily unavailable Device Status: 0x0000 (Bus Powered) _______________________________________________ Pcsclite-muscle mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pcsclite-muscle
