Yes ! A pity though that the driver does not nicely explain this fact ... but maybe this is (technically) not possible ?
In any case: That also perfectly explains why the sp05 (from debian) works ;) ... and why I could NOT find anything wrong with the compilation + installation of the latest sp10 ;) ... THANKS! Now the world makes sense again :)) Knuth P.S.: You may hence close my ReinerSCT [Ticket#2016111510000779] ;) -- On 15/11/16 16:11, Maximilian Stein wrote: > Hi Knuth, > > maybe your reader is one of the readers that are announced to be > discontinued in [1]. They say that driver support will be dropped for > cyberJack basic, cyberJack pinpad and cyberJack e-com 2.0. In [2] it > looks to me like all cyberJack e-com are discontinued since mid 2012, > hence support from the driver should have been removed. > > The behaviour of the IFD handler would make sense if the handler itself > checks if the given reader is supported (by checking PID /VID or > whatever) on initialisation. > > Cheers > Maximilian > > [1] http://www.reiner-sct.com/old > [2] > https://forum.reiner-sct.com/index.php?/topic/2811-aktuelle-cyberjack-firmware-versionen/ > > On 15.11.2016 14:09, TT wrote: >> Strangely, the ubuntu driver: >> >> http://packages.ubuntu.com/xenial/libifd-cyberjack6v5 >> >> works fine. >> >> They are using sp05 and Arch is using sp10. >> >> There seem no additional patches... >> >> Knuth >> >> >> On 15/11/16 13:03, Ludovic Rousseau wrote: >>> 2016-11-15 12:50 GMT+01:00 TT <[email protected]>: >>>> Hi, >>> Hello, >>> >>>> I am hoping you might be able to help me. >>>> >>>> I never had problems running the reader, but now I do and don't know >>>> what to try anymore :( >>>> >>>> But first things first: >>>> >>>> ////////////////////////////////////////////////// >>>> //// Versions >>>> >>>> * CCID driver version: community/ccid 1.4.25-1 [installed] >>>> * pcsc-lite version: community/pcsclite 1.8.16-1 [installed] >>>> * smart card reader name: ReinerSCT Cyberjack e-com [#1#] >>>> * the output of the command "/usr/sbin/pcscd --version": >>>> pcsc-lite version 1.8.16. >>>> Copyright (C) 1999-2002 by David Corcoran <[email protected]>. >>>> Copyright (C) 2001-2015 by Ludovic Rousseau <[email protected]>. >>>> Copyright (C) 2003-2004 by Damien Sauveron <[email protected]>. >>>> Report bugs to <[email protected]>. >>>> Enabled features: Linux x86_64-pc-linux-gnu serial usb libudev >>>> usbdropdir=/usr/lib/pcsc/drivers ipcdir=/run/pcscd >>>> configdir=/etc/reader.conf.d >>>> >>>> #1#: aur/pcsc-cyberjack 3.99.5_SP10-2 (29, 0.01) [installed] >>>> ((( >>>> >>>> source=("http://support.reiner-sct.de/downloads/LINUX/V${pkgver}/pcsc-cyberjack_${_pkgver}.tar.tar";) >>>> >>>> sha256sums=('11099c29594a73db19a4a0d9c448308c9c1ec3868862fd3838d0849b0debc7a8') >>>> >>>> ./configure \ >>>> --prefix=/usr \ >>>> --mandir=/usr/share/man/man8 \ >>>> --sysconfdir=/etc/"${pkgname}" \ >>>> --enable-udev \ >>>> --with-usbdropdir=$(pkg-config libpcsclite --variable=usbdropdir) >>>> >>>> make >>>> ))) >>>> >>>> >>>> >>>> ////////////////////////////////////////////////// >>>> //// Platform >>>> >>>> * Operating system or GNU/Linux distribution name and version: >>>> archlinux >>>> Linux horizon 4.8.7-nvme #1 SMP PREEMPT Tue Nov 15 10:28:13 CET >>>> 2016 x86_64 GNU/Linux (archlinux kernel + nvme powersaving patch) >>>> >>>> Smart card middleware name and version: hmmm I am not sure what you >>>> mean (I know what a middleware would be in general, but how do I >>>> determine this in my context ?), sorry ! >>>> Reader manufacturer name: ReinerSCT >>>> Reader model name: cyberJack e-com >>>> Smart card name: Sparkasse HBCI card >>>> >>>> >>>> >>>> ////////////////////////////////////////////////// >>>> //// Log >>>> >>>> * Killed any running pcscd process >>>> * Started pcscd exactly as described bellow: >>>> sudo LIBCCID_ifdLogLevel=0x000F pcscd --foreground --debug --apdu >>>> --color | tee log.txt >>>> >>>> Reader was first NOT plugged, then (after line: >>>> 00000108 hotplug_libudev.c:294:get_driver() Looking for a driver >>>> for VID: 0x2109, PID: 0x0812, path: /dev/bus/usb/002/002 >>>> I plugged it. >>>> >>>> Please find the log.txt attached. >>>> >>>> >>>> >>>> >>>> ////////////////////////////////////////////////// >>>> //// Some additional info (each starts with ####) >>>> >>>> #### ls -la /var/run/pcscd >>>> total 4 >>>> drwxr-xr-x 2 root root 80 Nov 15 12:46 . >>>> drwxr-xr-x 20 root root 460 Nov 15 11:08 .. >>>> srw-rw-rw- 1 root root 0 Nov 15 12:46 pcscd.comm >>>> -rw-r--r-- 1 root root 7 Nov 15 12:46 pcscd.pid >>>> >>>> >>>> #### ls -la /dev/bus/usb/001/009 >>>> crw-rw-r-- 1 root root 189, 8 Nov 15 11:54 /dev/bus/usb/001/009 >>>> >>>> >>>> #### lsusb -vvv # section about cyberjack: >>>> >>>> Bus 001 Device 009: ID 0c4b:0401 Reiner SCT Kartensysteme GmbH cyberJack >>>> pinpad(a2) >>>> Device Descriptor: >>>> bLength 18 >>>> bDescriptorType 1 >>>> bcdUSB 1.10 >>>> bDeviceClass 0 >>>> bDeviceSubClass 0 >>>> bDeviceProtocol 0 >>>> bMaxPacketSize0 16 >>>> idVendor 0x0c4b Reiner SCT Kartensysteme GmbH >>>> idProduct 0x0401 cyberJack pinpad(a2) >>>> bcdDevice 0.01 >>>> iManufacturer 1 Reiner-SCT >>>> iProduct 2 cyberJack e-com(f) >>>> iSerial 3 7091604504 >>>> bNumConfigurations 1 >>>> Configuration Descriptor: >>>> bLength 9 >>>> bDescriptorType 2 >>>> wTotalLength 93 >>>> bNumInterfaces 1 >>>> bConfigurationValue 1 >>>> iConfiguration 0 >>>> bmAttributes 0x80 >>>> (Bus Powered) >>>> MaxPower 96mA >>>> Interface Descriptor: >>>> bLength 9 >>>> bDescriptorType 4 >>>> bInterfaceNumber 0 >>>> bAlternateSetting 0 >>>> bNumEndpoints 3 >>>> bInterfaceClass 255 Vendor Specific Class >>>> bInterfaceSubClass 0 >>>> bInterfaceProtocol 0 >>>> iInterface 0 >>>> Endpoint Descriptor: >>>> bLength 7 >>>> bDescriptorType 5 >>>> bEndpointAddress 0x81 EP 1 IN >>>> bmAttributes 3 >>>> Transfer Type Interrupt >>>> Synch Type None >>>> Usage Type Data >>>> wMaxPacketSize 0x0010 1x 16 bytes >>>> bInterval 5 >>>> Endpoint Descriptor: >>>> bLength 7 >>>> bDescriptorType 5 >>>> bEndpointAddress 0x82 EP 2 IN >>>> bmAttributes 2 >>>> Transfer Type Bulk >>>> Synch Type None >>>> Usage Type Data >>>> wMaxPacketSize 0x0040 1x 64 bytes >>>> bInterval 1 >>>> Endpoint Descriptor: >>>> bLength 7 >>>> bDescriptorType 5 >>>> bEndpointAddress 0x02 EP 2 OUT >>>> bmAttributes 2 >>>> Transfer Type Bulk >>>> Synch Type None >>>> Usage Type Data >>>> wMaxPacketSize 0x0040 1x 64 bytes >>>> bInterval 1 >>>> DEVICE CLASS: 36 21 00 10 00 07 03 00 00 00 a0 0f 00 00 40 1f >>>> 00 00 00 58 27 00 00 90 d0 03 00 00 fe 00 00 00 07 00 00 00 00 00 00 00 >>>> 30 00 01 00 0e 01 00 00 ff ff 00 00 03 01 >>>> Device Status: 0x0000 >>>> (Bus Powered) >>>> >>>> #### ps faux|grep pcscd # pcscd is running as root >>>> root 13784 0.0 0.0 71812 5408 pts/7 S+ 12:46 0:00 >>>> \_ sudo LIBCCID_ifdLogLevel=0x000F pcscd --foreground --debug --apdu >>>> --color >>>> root 13786 0.0 0.0 26480 2460 pts/7 Sl+ 12:46 0:00 >>>> | \_ pcscd --foreground --debug --apdu --color >>>> >>>> >>>> ### HISTORY of this issue: >>>> The reader always worked fine. >>>> I am now trying it the first time on a new DELL XPS 13 notebook under >>>> archlinux. >>>> >>>> >>>> #### Do you have any idea what I can try ? >>>> >>>> Thanks a lot for any hint. Because for now I fell stuck on how to >>>> further debug this :( >>> 00014585 readerfactory.c:1097:RFInitializeReader() Open Port 0x200000 >>> Failed (usb:0c4b/0401:libudev:0:/dev/bus/usb/001/014) >>> 00000010 readerfactory.c:372:RFAddReader() REINER SCT cyberJack pp_a2 >>> (7091604504) init failed. >>> >>> The driver failed to initialize. >>> >>> You should report the issue to driver maintainer. Or try to debug the >>> libifd-cyberjack.so driver yourself. >>> >>> You can also try to copy the libifd-cyberjack.so driver from your >>> other computer, where the reader was working fine, and install it on >>> the DELL XPS 13. >>> >>> Bye >>> >> >> _______________________________________________ >> Pcsclite-muscle mailing list >> [email protected] >> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pcsclite-muscle >> > > _______________________________________________ > Pcsclite-muscle mailing list > [email protected] > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pcsclite-muscle _______________________________________________ Pcsclite-muscle mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pcsclite-muscle
