At 05:58 PM 8/21/01 +0200, Bram wrote the following:
>What do I need to run 2 hard disks together so one is a mirror image of the
>other. i.e. so that if one fails the second one will just take over. Any
>suggestions where I can read up on this?
Normally you would need server software such as Windows NT/2000 to enable
disk mirroring.
See Overview of Disk Mirroring (RAID Level 1) in Windows NT
http://support.microsoft.com/support/kb/articles/Q114/7/79.ASP
You can also do it in Linux
http://teak.wiscnet.net/linux-mirror-cookbook/
>Second question. If I have a telephone switchbaord with , say 10 lines, can I
>connect several lines at once to one computer, and thus send out several
>downloads( or is it uploads) at the same time.
Yes, typically done with BBS (Bulletin Board System) software.
See BBS Software Guide
http://www.thedirectory.org/diamond/software.htm
--
Gerry Boyd
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
