Hi all,
Thanks to anyone who may have responded (digest user here); I discovered
that I can find the printer's IP adress from its Information menu found
in the Menu button's menu. The procedure is fairly straightforward after
that.
Original message:
Here's the scenario: I've got a small network of Macs that share an HP
5000 GN printer using an Asante Friendly Net 5 port hub. A lone 300Mhz
Micron PC (W98SE) is directly connected to the same hub via RJ-45 cable
from its 3Com Etherlink III NIC. What steps do I follow to install and
use the printer on the Micron?
Chuck
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
