Can you connect the Me drive to another drive and transfer the data that way. Nothing any easier than connecting the ribbon from one system's drive to the drive on another system.
Other methods could be a crossover cable or a direct cable connection. There are numerous examples of these methods in the archives.
Peter Kaulback
In the hour of 05:08 AM 10/28/2003, johnf spoke this:
Yes thanks but.................. the affected computer is being finishedwith and I was hoping there might be an easier option. ----- Original Message ----- From: "Jorge D. Camboni" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, October 28, 2003 9:53 AM Subject: Re: PCWorks: ME troubles
> TRY A NEW FLOPPY DRIVE > Jorge > > > At 08:26 a.m. 28/10/03 +0000, you wrote: > >THe present computer with ME is not reading floppy disks. > >It states that the disks are not formatted. > >The disks are OK on other computers. > >The computer is being replaced but cannot therefore transfer info to the new > >computer via floppies. > >Any help please as to what the problem with the floppy could be or is there > >another way to transfer the data. > >Thanks > >John
============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
