Wally, Have you tried installing a new driver: http://www.monitor-drivers.com/drivers/45/45742.htm
HTH, Ed [EMAIL PROTECTED] wrote: >I have a KDS KD-5250 15" monitor which does not >display the colors properly. When white is required, the >three color guns are full on and white is displayed. This >is as it should be. >When shades of gray are required, each color gun should >reduce its intensity in such a manner that the brightness of >each color phosphor decreases an equal amount. This produces >darker shades of gray. The green gun does not reduce >its intensity as much as the red and blue guns which results >in a dark green field instead of a gray field. >There are no external adjustments for color balance. >Does anyone have any suggestions concerning what internal >adjustments can be made to the separate color gun amplifiers >in order to correct this problem? I have not as yet opened >the monitor case so I have no idea what adjustments are >available in this monitor. > >Wally ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
