On Mon, 3 Aug 2009, Mathieu Bouchard wrote:
On Sun, 2 Aug 2009, sisil mehta wrote:
I have linux kernel 2.6.24-23 generic. I downloaded pwc 10.0.12 rc1 and as
per their website(
http://www.lavrsen.dk/foswiki/bin/view/PWC/InstallationStandAloneModuleKernel2x6)
it says : Patch the module You might need to patch the module if you have
kernel 2.6.22 or higher. Applies to version pwc-10.0.12-rc1:
http://www.xs4all.nl/~carlo17/pwc/index.html<http://www.xs4all.nl/%7Ecarlo17/pwc/index.html>
i'm new to linux. so cansomeone help me with this?I didnt really understand
how to do this.
First look whether you already have the driver loading automatically when
plugging the camera. In any case, here are some useful commands:
lsusb
lsmod
modprobe pwc
locate pwc.ko
And I say that because you don't need to patch the module if you already
have a precompiled module. you don't even have to load the module if it
gets loaded automatically.
Any linux user who's been around for a while will have spent a lot of time
trying to compile a module, and then finally try to load it, just to see
the message "module already loaded" because the module was really already
loaded since before the user even thought about downloading the module's
source... Linux is not what it was in the nineties.
_ _ __ ___ _____ ________ _____________ _____________________ ...
| Mathieu Bouchard - tél:+1.514.383.3801, Montréal, Québec
_______________________________________________
Pd-dev mailing list
[email protected]
http://lists.puredata.info/listinfo/pd-dev
