---
** [bugs:#1169] iemnet/udpsend : dont notify if client disappear**
**Status:** open
**Group:** v0.46
**Created:** Sat Nov 08, 2014 07:52 PM UTC by Antoine Villeret
**Last Updated:** Sat Nov 08, 2014 07:52 PM UTC
**Owner:** nobody
With udpsend/udpreceive from SVN rev 17371.
1. Open udpsend-help.pd and udpreceive-help.pd.
2. Connect udpsend by clicking [connect 127.0.0.1 9997( message box, the
checkbox below [udpsend] should be checked
3. Send some data by clicking either [send 0 1 2 3( or [99 98 97( message box.
4. You may see some print in Pd's console.
5. Close udpreceive-help.pd
6. Repeat step 4.
At this point the checkbox below udpsend is still checked while nobody is
listening on port 9997.
7. Re-open udpreceive-help.pd, thus someone is now listening on port 9997.
8. Repeat step 4.
You won't see anything in Pd's console, but checkbox is still checked (udpsend
seems to be connected).
To get udpsend and udpreceive connected again, you have to disconnected by hand
(by clicking [disconnect( message and [connect blablabla( again.
Note that if you don't send anything while nobody is listening (i.e. after
closing udpreceive-help.pd) and wait until somone is listening again, you don't
have to disconnect/reconnect.
Please also note that mrpeach's udpsend notify when udpreceive disappears on
the 2d message send.
---
Sent from sourceforge.net because [email protected] is subscribed to
https://sourceforge.net/p/pure-data/bugs/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/pure-data/admin/bugs/options. Or, if this is a
mailing list, you can unsubscribe from the mailing list.
_______________________________________________
Pd-dev mailing list
[email protected]
http://lists.puredata.info/listinfo/pd-dev
