hola, well, here you have a bandwidth issue, either your internet connection is not good enough to transmit video ( try to lower the quality in that case ) but, most probably, the giss server is a bit saturated and it doesn't take any more incoming stream.
join the giss channel to see if we can find a solution. saludos, sevy Jack wrote: >Hello list, hello Yves, >I have a problem with the patch 'giss-2.0.pd' (pd-extended 0.39.3- >extended – MacosX.4.11 – X11 1.1.3 – XFree86 4.4.0). >I have created a channel on http://giss.tv/. >I use a FireWire camera and i see the preview (no problem). >When i push the start bang in the emission, 'frames emited' go to 39 >or 40 or 41 then stop and Pd freezes during 5 minutes then output : >'shutting down encoder'. > >here the output from PD : >pdp_theonice~ : setting password to ***** >pdp_theonice~ : connecting to http://stream.giss.tv:8000/****.org >pdp_theonice~ : connection request but a connection is pending . . . >disconnecting >pdp_theonice~ : connection thread 26104523 launched >pdp_theonice~ : connecting to port 8000 >pdp_theonice~ : logged in to stream.giss.tv >pdp_theonice~ : connecting child 26104523 exiting. . . . >pdp_theonice~ : initializing encoder. . . >pdp_theonice~ : encoder initialized. >pdp_theonice~ : writing headers. . . >pdp_theonice~ : start streaming at 7 frames/second > >(freeze here) >then 5 mn later : > >pdp_theonice~ : could not write audio packet (ret=-1). >pdp_theonice~ : shutting down encoder >pdp_theonice~ : could not write audio packet (ret=-1). >pdp_theonice~ : could not write audio packet (ret=-1). > >Note : it's the same with a quicktime video > >any idea ? > >Jack >_______________________________________________ >[email protected] mailing list >UNSUBSCRIBE and account-management -> >http://lists.puredata.info/listinfo/pd-list > > > > _______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
