Hi, Thanks for helping with this. I finally got it working, by changing the Octamic to ADAT2 and then defining all the channels from -audioindev 11.
Thanks alot for the help. -Mika Quoting marius schebella <[EMAIL PROTECTED]>: > hi mika, > > have you tried -audioindev 4,7 -inchannels 12? I think you should be > able to use different soundcards, but maybe there is no possibility to > use 4 from the one and 8 from the other, but rather all channels from > both soundcards?? but I don't know about that. maybe -audioindev > 4,5,7,8,9,10? > on the other hand, if the octamic pre-amp is connected to adat1 can you > do -audioindev 1, and -inchannels 36, does that give you all inchannels? > marius. > > Mika Ristimäki wrote: >> Hi again, >> >> I've been searching the list archives even more and I've found >> several posts that say that this can be done and that the >> instructions can be found from the archives. However I haven't been >> able to find any instructions. =) So any ideas how to do it in >> Windows XP? Sorry for nagging, but I really like using Pd, but if >> there is not support for my hardware I might have to change the >> software. >> >> -Mika >> >> >>> Hi all, >>> >>> I have a problem how to use multiple audio devices in Pd. I tired to >>> search the archives but didn't find anything useful. Anyway... >>> >>> I have RME Fireface 800 audio interface and RME Octamic microphone >>> pre-amplifier. Octamic is connected to Fireface with ADAT. I'm using >>> Windows XP. I have connected 8 mics to Octamic and 4 mics to Fireface >>> (it also has 4 mic level inputs). The problem is that I don't know how >>> to get all 12 channels to work in Pd. >>> >>> when I start Pd with -listdev, I get >>> >>> audio input devices: >>> 0. Live! Cam Optia AF (Mic) >>> 1. Fireface Analog (1+2) MME >>> 2. Fireface Analog (3+4) MME >>> 3. Fireface Analog (5+6) MME >>> 4. Fireface Analog (7+8) MME >>> 5. Fireface Analog (9+10) MME >>> 6. Fireface SPDIF MME >>> 7. Fireface ADAT1 (1+2) MME >>> 8. Fireface ADAT1 (3+4) MME >>> 9. Fireface ADAT1 (5+6) MME >>> 10. Fireface ADAT1 (7+8) MME >>> 11. Fireface ADAT2 (1+2) MME >>> 12. Fireface ADAT2 (3+4) MME >>> 13. Fireface ADAT2 (5+6) MME >>> 14. Fireface ADAT2 (7+8) MME >>> 15. Fireface Analog (1+2) >>> 16. Fireface Analog (3+4) >>> 17. Fireface Analog (5+6) >>> 18. Fireface Analog (7+8) >>> 19. Fireface Analog (9+10) >>> >>> I can have the 8 Octamic channels if start Pd with -audioindev 7 >>> -inchannels 8. Or the 4 Fireface channel by -audioindev 4 -inchannels >>> 4. But when I try to define both like this, -audioindev 4,7 >>> -inchannels 4,8 pd gives an error "separate audio device choice not >>> supported\; using sequential devices." >>> >>> -audioindev 4 -inchannels 12, does not work either. >>> >>> So is it impossible to get the two different devices working >>> simultaneously or is there some kind of hack? >>> >>> Thanks for any help >>> >>> -Mika >>> >>> >>> >>> >> >> >> >> _______________________________________________ >> [email protected] mailing list >> UNSUBSCRIBE and account-management -> >> http://lists.puredata.info/listinfo/pd-list >> _______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
