On 13 Jul 2008, at 7:28 AM, Jack wrote: > I would like to use one PC with ubuntu and 2 graphic cards with 2 > outputs (total : 4 video outputs). > I usually use a Mac. > Can you give me a good harware configuation using Pd and GEM > equivalent to a MacPro configuration (2 intel Quad-core 2,8 GHz and 2 > ATI Radeon HD 2600 XT) ? Not too expensive please !
I did just that a couple of weeks ago - I used 2x quite different NVIDIA cards - an older NVIDIA 6800 card and a cheaper but newer Gigabyte card with an NVIDIA 9600GT chip [less than $200 here in Australia], both PCI-E. The motherboard has an NVIDIA chipset. Both work fine together, the NVIDIA driver recognises them both easily. I could put each in Twinview mode then use 2 gemwindows [a while back I successfully tried the multi-window version of Gem, but haven't done so recently], but instead I set up xorg to give 4 separate displays for different Gem windows (4 instances of Pd, one running on each of the 4 displays). I may buy another of the 9600 cards and see if I can get a single large gemwindow for all 4 projectors using the SLI link - but I haven't done that yet. I run Debian (the Sidux distribution with a 2.6.25 kernel. The processor is an oldish dual core AMD. simon _______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list