Hi, You can set the value of the slider without having it sent back with a 'set' message
[ctlin 1] | [/127] | [set $1( | [s rec] cheers, Kristof ____________________________________ [EMAIL PROTECTED] http://kristoflauwers.domainepublic.net http://myspace.com/xofxof ____________________________________ At 15:31 2008-07-22, you wrote: >Hi > >I have assigned a knob on my bcr2000 to a vertical slider in pd. Under >the sliders properties, I have set send-symbol and receive-symbol to >"send" and "rec". I then have > >[ctlin 1] >| >[/ 127] >| >[s rec] > > >[r send] >| >[* 127] >| >[ctlout 1] > >This basically works, the upper one is receiving from the bcr and moving >the fader in pd, the lower one is updating the display on the bcr when >the knob is moved in pd. > >The problem is that pd sends it's send-symbol, even if the fader is >moved as a result of the receive-symbol. This means that the bcr get's >the value right back, with a small delay, which causes the whole to be >very reluctent to accept movements from the bcr. > >I could make some logic that doesn't send the value back if it was >received from midi, but thought I'd ask if there was a simpler solution? >For instance is it possible to have pd's knobs *not* send it's >send-symbol if the fader was moved as a result of a receive-symbol? > >-- >peace, love & harmony >Atte > >http://atte.dk | http://myspace.com/attejensen >http://anagrammer.dk | http://modlys.dk > >_______________________________________________ >Pd-list@iem.at mailing list >UNSUBSCRIBE and account-management -> >http://lists.puredata.info/listinfo/pd-list _______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list