Re: [PD] pduino digital read problems

olsen Fri, 20 Nov 2009 09:49:24 -0800

would be nice to have the info about the port setting somewhere - eitherin the test or in the help - somehow it changes your layout of thearduino-test.pd.

i've attached a basic variation
ø



Hans-Christoph Steiner wrote:

I'm not sure what you mean, but Patches welcome!  :-D

.hc

On Nov 19, 2009, at 1:44 PM, olsen wrote:
wouldn't it be nice to have the info in the brackets somewhere in thearduino-help?
Hans-Christoph Steiner wrote:
If you look at the arduino-help.pd or arduino-test.pd, the messageshould be [digitalIns 1 1(. The first number is the port# and thesecond is whether to enable it or not. (PORT0==pins 0-7, PORT1==pins8-13, PORT2==analog pins).
If you are using Arduino 0017, you might want to upgrade the includedFirmata library with the latest version (check the README for how)
http://at.or.at/hans/pd/objects.html#pduino
.hc
On Nov 19, 2009, at 6:16 AM, altern wrote:
hi
i am doing this small example to read a digital sensor with pduino.i test it with an arduino program that reads pin 2 and writes it topin 13 and this works fine, i get a LED light on and off with myinfrared sensor.
however when i try this very same setup in PD i dont get it to work.i am starting up arduino object to the right COM port, i can writemanually to pin 13 and the LED flashes, but i dont get anything frompin 2. I have not used digital sensors for ages with PD so i dontremember the right way to set them up.
I send this message to arduino
pinMode 2 0

i also tried sending before
digitalIns 1
but nothing comes from comport outlet. so i am not sure what i amdoing wrong
please help!

enrike

_______________________________________________
[email protected] mailing list
UNSUBSCRIBE and account-management ->http://lists.puredata.info/listinfo/pd-list
----------------------------------------------------------------------------Computer science is no more related to the computer than astronomy isrelated to the telescope. -Edsger Dykstra
_______________________________________________
[email protected] mailing list
UNSUBSCRIBE and account-management ->http://lists.puredata.info/listinfo/pd-list
--
ETs DNA will not be televised
----------------------------------------------------------------------------
"It is convenient to imagine a power beyond us because that means wedon't have to examine our own lives.", from "The Idols ofEnvironmentalism", by Curtis White


--
ETs DNA will not be televised

#N canvas 523 105 765 519 10;
#X obj 313 116 cnv 15 100 22 empty empty empty 20 12 0 14 -253938 -66577
0;
#X obj 23 145 cnv 15 85 22 empty empty empty 20 12 0 14 -253938 -66577
0;
#X obj 155 170 cnv 15 60 22 empty empty empty 20 12 0 14 -253938 -66577
0;
#X msg 161 172 open 2;
#N canvas 128 22 525 433 serin 0;
#X obj 180 61 cnv 15 15 15 empty \$0-number-canvas 2 4 8 0 14 -233017
-1 0;
#X obj 200 225 s \$0-number-canvas;
#X obj 60 61 hradio 15 1 1 8 empty empty empty 0 -6 0 8 -225271 -1
-1 2;
#X obj 60 13 inlet;
#X msg 200 202 label \$1;
#X obj 200 180 makefilename %d;
#X obj 59 108 int;
#X msg 59 206 open \$1;
#X obj 59 377 outlet;
#X msg 201 306 set \$1 \$2;
#X obj 59 266 trigger bang anything;
#X obj 201 286 list;
#X obj 383 383 outlet;
#X obj 384 22 netreceive 34567;
#X obj 477 43 tgl 15 0 empty empty empty 0 -6 0 10 -262144 -1 -1 0
1;
#X obj 384 41 bng 15 250 50 0 empty empty empty 0 -6 0 10 -262144 -1
-1;
#X obj 187 24 delay 15000;
#X text 345 379 close;
#X text 209 4 for open/close automation in Makefile;
#N canvas 698 22 318 215 reset 0;
#X obj 65 24 inlet;
#X obj 66 58 bang;
#X obj 66 150 send ARDUINO_TEST_RESET;
#X msg 66 129 0;
#X msg 111 99 1;
#X obj 111 120 send ARDUINO_PINMODE_RESET;
#X connect 0 0 1 0;
#X connect 1 0 3 0;
#X connect 1 0 4 0;
#X connect 3 0 2 0;
#X connect 4 0 5 0;
#X restore 172 111 pd reset guis;
#X connect 2 0 6 0;
#X connect 2 0 19 0;
#X connect 3 0 2 0;
#X connect 4 0 1 0;
#X connect 5 0 4 0;
#X connect 6 0 5 0;
#X connect 6 0 7 0;
#X connect 7 0 10 0;
#X connect 9 0 8 0;
#X connect 10 0 8 0;
#X connect 10 1 11 0;
#X connect 11 0 9 0;
#X connect 13 0 15 0;
#X connect 13 1 14 0;
#X connect 15 0 16 0;
#X connect 15 0 12 0;
#X connect 16 0 2 0;
#X coords 0 -1 1 1 136 17 1 60 60;
#X restore 161 149 pd serin;
#X text 158 131 serial port #;
#X msg 221 172 close;
#X obj 85 104 hsl 150 17 0 1 0 0 empty ARDUINO_TEST_RESET analog_output_(0-1)
20 9 1 10 -225271 -1 -1 0 0;
#X obj 267 302 tgl 15 1 empty empty empty 0 -6 0 8 -225271 -1 -1 1
1;
#X msg 437 222 digitalIns 2 1;
#X msg 437 165 analogIns 0 0;
#N canvas 162 133 610 460 serin 0;
#X obj 59 337 outlet;
#X obj 59 266 trigger bang anything;
#X obj 201 286 list;
#X obj 60 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 0 5 9 1
12 -262130 -1 -1 0 1;
#X obj 75 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 1 5 9 1
12 -262130 -1 -1 0 1;
#X obj 90 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 2 5 9 1
12 -262130 -1 -1 0 1;
#X obj 105 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 3 5 9
1 12 -262130 -1 -1 0 1;
#X obj 120 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 4 5 9
1 12 -262130 -1 -1 0 1;
#X obj 135 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 5 5 9
1 12 -262130 -1 -1 0 1;
#X obj 150 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 6 5 9
1 12 -262130 -1 -1 0 1;
#X obj 165 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 7 5 9
1 12 -262130 -1 -1 0 1;
#X msg 59 210 analogIns \$1 \$2;
#X msg 35 106 0 \$1;
#X msg 70 106 1 \$1;
#X msg 105 106 2 \$1;
#X msg 140 106 3 \$1;
#X msg 175 106 4 \$1;
#X msg 210 106 5 \$1;
#X msg 245 106 6 \$1;
#X msg 280 106 7 \$1;
#X msg 202 307 set \$1 \$2 \$3;
#X connect 1 0 0 0;
#X connect 1 1 2 0;
#X connect 2 0 20 0;
#X connect 3 0 12 0;
#X connect 4 0 13 0;
#X connect 5 0 14 0;
#X connect 6 0 15 0;
#X connect 7 0 16 0;
#X connect 8 0 17 0;
#X connect 9 0 18 0;
#X connect 10 0 19 0;
#X connect 11 0 1 0;
#X connect 12 0 11 0;
#X connect 13 0 11 0;
#X connect 14 0 11 0;
#X connect 15 0 11 0;
#X connect 16 0 11 0;
#X connect 17 0 11 0;
#X connect 18 0 11 0;
#X connect 19 0 11 0;
#X connect 20 0 0 0;
#X coords 0 -1 1 1 120 16 1 60 60;
#X restore 437 145 pd serin;
#X floatatom 22 426 5 0 0 3 a0 - -;
#X floatatom 68 426 5 0 0 3 a1 - -;
#X floatatom 114 426 5 0 0 3 a2 - -;
#X floatatom 160 426 5 0 0 3 a3 - -;
#X floatatom 206 426 5 0 0 3 a4 - -;
#X floatatom 252 426 5 0 0 3 a5 - -;
#X text 290 273 <- argument sets port #;
#X obj 30 66 hradio 15 1 0 14 empty empty empty 0 -6 0 8 -176124 -1
-1 0;
#X text 139 52 7;
#X text 32 52 0;
#X text 180 52 10;
#X text 226 52 13;
#X text 91 52 4;
#X text 61 52 2;
#X text 107 52 5;
#X text 122 52 6;
#X text 77 52 3;
#X text 153 52 8;
#X text 170 52 9;
#X text 196 52 11;
#X text 211 52 12;
#X text 47 52 1;
#X msg 31 147 analog 0 0;
#X msg 319 155 info;
#X msg 358 155 version;
#X obj 220 302 spigot;
#X msg 319 118 pinMode 23 2;
#N canvas 67 22 475 478 sending 0;
#X obj 69 228 cnv 15 100 22 empty empty empty 20 12 0 14 -253938 -66577
0;
#X obj 78 434 outlet;
#X msg 78 231 digital 22 0;
#X obj 127 148 tgl 15 0 empty empty 7 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 144 148 tgl 15 0 empty empty 8 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 161 148 tgl 15 0 empty empty 9 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 178 148 tgl 15 0 empty empty 10 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 195 148 tgl 15 0 empty empty 11 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 212 148 tgl 15 0 empty empty 12 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 229 148 tgl 15 0 empty empty 13 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 42 148 tgl 15 0 empty empty 2 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 59 148 tgl 15 0 empty empty 3 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 76 148 tgl 15 0 empty empty 4 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 93 148 tgl 15 0 empty empty 5 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 110 148 tgl 15 0 empty empty 6 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 418 123 tgl 25 0 empty ARDUINO_TEST_RESET ALL 2 12 0 12 -262144
-1 -1 0 1;
#X obj 388 72 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0 16383
;
#X obj 388 92 metro 100;
#X obj 301 9 inlet;
#X obj 8 148 tgl 15 0 empty empty 0 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 25 148 tgl 15 0 empty empty 1 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 8 148 cnv 15 15 15 empty empty Rx 1 10 0 11 -128992 -86277 0
;
#X obj 25 148 cnv 15 15 15 empty empty Tx 1 10 0 11 -128992 -13381
0;
#X obj 301 43 trigger 0 float;
#X obj 301 64 select 0;
#X msg 301 84 0;
#X msg 405 389 port 1 0;
#X msg 263 389 port 0 0;
#X msg 189 389 port 0 255;
#X msg 331 389 port 1 255;
#X text 95 291 or send 8-bit ports in one message:;
#X msg 159 338 port 1 \$1;
#X msg 91 338 port 0 \$1;
#X msg 230 338 port 2 \$1;
#X obj 362 297 tgl 25 0 empty ARDUINO_TEST_RESET ALL 2 12 0 12 -262144
-1 -1 0 255;
#X obj 362 246 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
16383;
#X obj 362 266 metro 100;
#X floatatom 362 329 5 0 0 0 - - -;
#X obj 246 148 tgl 15 0 empty empty 14 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 263 148 tgl 15 0 empty empty 15 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 280 148 tgl 15 0 empty empty 16 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 297 148 tgl 15 0 empty empty 17 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 314 148 tgl 15 0 empty empty 18 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 331 148 tgl 15 0 empty empty 19 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 348 148 tgl 15 0 empty empty 20 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 365 148 tgl 15 0 empty empty 21 0 -6 1 12 -233017 -1 -1 0 1
;
#N canvas 314 233 1035 340 generate 0;
#X obj 12 24 inlet;
#X obj 52 24 inlet;
#X obj 91 24 inlet;
#X obj 131 24 inlet;
#X obj 171 24 inlet;
#X obj 211 24 inlet;
#X obj 250 24 inlet;
#X obj 290 24 inlet;
#X obj 331 23 inlet;
#X obj 371 23 inlet;
#X obj 410 23 inlet;
#X obj 450 23 inlet;
#X obj 490 23 inlet;
#X msg 12 66 digital 0 \$1;
#X msg 52 88 digital 1 \$1;
#X msg 91 110 digital 2 \$1;
#X msg 131 130 digital 3 \$1;
#X msg 171 62 digital 4 \$1;
#X msg 211 84 digital 5 \$1;
#X msg 250 106 digital 6 \$1;
#X msg 290 126 digital 7 \$1;
#X msg 331 58 digital 8 \$1;
#X msg 371 80 digital 9 \$1;
#X msg 410 102 digital 10 \$1;
#X msg 450 122 digital 11 \$1;
#X msg 490 50 digital 12 \$1;
#X obj 529 23 inlet;
#X msg 529 70 digital 13 \$1;
#X obj 513 302 outlet;
#X obj 513 263 trigger bang anything;
#X obj 513 214 list prepend set;
#X obj 513 238 list trim;
#X obj 570 23 inlet;
#X obj 610 23 inlet;
#X obj 650 23 inlet;
#X obj 689 23 inlet;
#X msg 570 102 digital 14 \$1;
#X msg 610 122 digital 15 \$1;
#X msg 650 50 digital 16 \$1;
#X msg 689 70 digital 17 \$1;
#X obj 730 23 inlet;
#X obj 770 23 inlet;
#X obj 810 23 inlet;
#X obj 849 23 inlet;
#X msg 730 102 digital 18 \$1;
#X msg 770 122 digital 19 \$1;
#X msg 810 50 digital 20 \$1;
#X msg 849 70 digital 21 \$1;
#X obj 890 23 inlet;
#X obj 930 23 inlet;
#X msg 890 102 digital 22 \$1;
#X msg 930 122 digital 23 \$1;
#X connect 0 0 13 0;
#X connect 1 0 14 0;
#X connect 2 0 15 0;
#X connect 3 0 16 0;
#X connect 4 0 17 0;
#X connect 5 0 18 0;
#X connect 6 0 19 0;
#X connect 7 0 20 0;
#X connect 8 0 21 0;
#X connect 9 0 22 0;
#X connect 10 0 23 0;
#X connect 11 0 24 0;
#X connect 12 0 25 0;
#X connect 13 0 30 0;
#X connect 14 0 30 0;
#X connect 15 0 30 0;
#X connect 16 0 30 0;
#X connect 17 0 30 0;
#X connect 18 0 30 0;
#X connect 19 0 30 0;
#X connect 20 0 30 0;
#X connect 21 0 30 0;
#X connect 22 0 30 0;
#X connect 23 0 30 0;
#X connect 24 0 30 0;
#X connect 25 0 30 0;
#X connect 26 0 27 0;
#X connect 27 0 30 0;
#X connect 29 0 28 0;
#X connect 29 1 28 0;
#X connect 30 0 31 0;
#X connect 31 0 29 0;
#X connect 32 0 36 0;
#X connect 33 0 37 0;
#X connect 34 0 38 0;
#X connect 35 0 39 0;
#X connect 36 0 30 0;
#X connect 37 0 30 0;
#X connect 38 0 30 0;
#X connect 39 0 30 0;
#X connect 40 0 44 0;
#X connect 41 0 45 0;
#X connect 42 0 46 0;
#X connect 43 0 47 0;
#X connect 44 0 30 0;
#X connect 45 0 30 0;
#X connect 46 0 30 0;
#X connect 47 0 30 0;
#X connect 48 0 50 0;
#X connect 49 0 51 0;
#X connect 50 0 30 0;
#X connect 51 0 30 0;
#X restore 78 201 pd generate digital out messages ------------------
;
#X obj 382 148 tgl 15 0 empty empty 22 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 399 148 tgl 15 0 empty empty 23 0 -6 1 12 -233017 -1 -1 0 1
;
#X connect 2 0 1 0;
#X connect 3 0 46 7;
#X connect 4 0 46 8;
#X connect 5 0 46 9;
#X connect 6 0 46 10;
#X connect 7 0 46 11;
#X connect 8 0 46 12;
#X connect 9 0 46 13;
#X connect 10 0 46 2;
#X connect 11 0 46 3;
#X connect 12 0 46 4;
#X connect 13 0 46 5;
#X connect 14 0 46 6;
#X connect 15 0 9 0;
#X connect 15 0 8 0;
#X connect 15 0 7 0;
#X connect 15 0 6 0;
#X connect 15 0 5 0;
#X connect 15 0 4 0;
#X connect 15 0 3 0;
#X connect 15 0 14 0;
#X connect 15 0 13 0;
#X connect 15 0 12 0;
#X connect 15 0 11 0;
#X connect 15 0 10 0;
#X connect 15 0 43 0;
#X connect 15 0 44 0;
#X connect 15 0 45 0;
#X connect 15 0 42 0;
#X connect 15 0 41 0;
#X connect 15 0 40 0;
#X connect 15 0 39 0;
#X connect 15 0 38 0;
#X connect 15 0 48 0;
#X connect 15 0 47 0;
#X connect 16 0 17 0;
#X connect 17 0 15 0;
#X connect 18 0 23 0;
#X connect 23 0 24 0;
#X connect 23 1 16 0;
#X connect 24 0 25 0;
#X connect 25 0 15 0;
#X connect 26 0 1 0;
#X connect 27 0 1 0;
#X connect 28 0 1 0;
#X connect 29 0 1 0;
#X connect 31 0 1 0;
#X connect 32 0 1 0;
#X connect 33 0 1 0;
#X connect 34 0 37 0;
#X connect 34 0 33 0;
#X connect 34 0 31 0;
#X connect 34 0 32 0;
#X connect 35 0 36 0;
#X connect 36 0 34 0;
#X connect 38 0 46 14;
#X connect 39 0 46 15;
#X connect 40 0 46 16;
#X connect 41 0 46 17;
#X connect 42 0 46 18;
#X connect 43 0 46 19;
#X connect 44 0 46 20;
#X connect 45 0 46 21;
#X connect 46 0 2 0;
#X connect 47 0 46 22;
#X connect 48 0 46 23;
#X restore 14 244 pd sending digital outs;
#X obj 14 225 tgl 15 0 empty empty empty 0 -6 0 8 -225271 -1 -1 0 16383
;
#X text 32 224 pulse all outputs;
#X floatatom 298 426 5 0 0 3 a6 - -;
#X floatatom 344 426 5 0 0 3 a7 - -;
#X obj 220 324 route analog;
#X obj 121 369 route 0 1 2 3 4 5 6 7;
#N canvas 978 22 499 396 display 0;
#X obj 6 7 inlet;
#X obj 6 28 mapping/resample 100;
#X obj 6 50 outlet;
#X obj 54 50 inlet;
#X obj 54 71 mapping/resample 100;
#X obj 54 93 outlet;
#X obj 103 93 inlet;
#X obj 103 114 mapping/resample 100;
#X obj 103 136 outlet;
#X obj 151 136 inlet;
#X obj 151 157 mapping/resample 100;
#X obj 151 179 outlet;
#X obj 200 179 inlet;
#X obj 200 200 mapping/resample 100;
#X obj 200 222 outlet;
#X obj 247 222 inlet;
#X obj 247 243 mapping/resample 100;
#X obj 247 265 outlet;
#X obj 295 265 inlet;
#X obj 295 286 mapping/resample 100;
#X obj 295 308 outlet;
#X obj 345 308 inlet;
#X obj 345 329 mapping/resample 100;
#X obj 345 351 outlet;
#X obj 60 290 receive ARDUINO_TEST_RESET;
#X connect 0 0 1 0;
#X connect 1 0 2 0;
#X connect 3 0 4 0;
#X connect 4 0 5 0;
#X connect 6 0 7 0;
#X connect 7 0 8 0;
#X connect 9 0 10 0;
#X connect 10 0 11 0;
#X connect 12 0 13 0;
#X connect 13 0 14 0;
#X connect 15 0 16 0;
#X connect 16 0 17 0;
#X connect 18 0 19 0;
#X connect 19 0 20 0;
#X connect 21 0 22 0;
#X connect 22 0 23 0;
#X connect 24 0 22 0;
#X connect 24 0 19 0;
#X connect 24 0 16 0;
#X connect 24 0 13 0;
#X connect 24 0 10 0;
#X connect 24 0 7 0;
#X connect 24 0 4 0;
#X connect 24 0 1 0;
#X restore 45 400 pd display values without pegging the CPU;
#X obj 397 433 route 0 1 2 3 4 5 6 7 8 9 10 11 12 13;
#X obj 428 455 tgl 15 0 empty ARDUINO_TEST_RESET 2 4 23 1 12 -232448
-1 -1 0 1;
#X obj 445 455 tgl 15 0 empty ARDUINO_TEST_RESET 3 4 23 1 12 -232448
-1 -1 0 1;
#X obj 462 455 tgl 15 0 empty ARDUINO_TEST_RESET 4 4 23 1 12 -232448
-1 -1 0 1;
#X obj 479 455 tgl 15 0 empty ARDUINO_TEST_RESET 5 4 23 1 12 -232448
-1 -1 0 1;
#X obj 496 455 tgl 15 0 empty ARDUINO_TEST_RESET 6 4 23 1 12 -232448
-1 -1 0 1;
#X obj 513 455 tgl 15 0 empty ARDUINO_TEST_RESET 7 4 23 1 12 -232448
-1 -1 0 1;
#X obj 530 455 tgl 15 0 empty ARDUINO_TEST_RESET 8 4 23 1 12 -232448
-1 -1 0 1;
#X obj 547 455 tgl 15 0 empty ARDUINO_TEST_RESET 9 4 23 1 12 -232448
-1 -1 0 1;
#X obj 564 455 tgl 15 0 empty ARDUINO_TEST_RESET 10 0 23 1 12 -232448
-1 -1 0 1;
#X obj 581 455 tgl 15 0 empty ARDUINO_TEST_RESET 11 0 23 1 12 -232448
-1 -1 0 1;
#X obj 598 455 tgl 15 0 empty ARDUINO_TEST_RESET 12 0 23 1 12 -232448
-1 -1 0 1;
#X obj 615 455 tgl 15 0 empty ARDUINO_TEST_RESET 13 0 23 1 12 -232448
-1 -1 0 1;
#X text 2 484 (C) Copyright 2006 Free Software Foundation;
#N canvas 0 22 451 224 ver 0;
#X obj 23 7 inlet;
#X obj 250 100 cnv 15 145 17 empty \$0-version_cnv empty 4 10 0 12
-203904 -1 0;
#X obj 23 157 send \$0-version_cnv;
#X msg 23 132 label \$1;
#X obj 48 103 symbol;
#X obj 38 77 loadbang;
#X msg 96 78 bang;
#X obj 309 163 outlet;
#X obj 23 52 zexy/makesymbol Firmata-%s.%s;
#X obj 23 29 route version bang;
#X connect 0 0 9 0;
#X connect 3 0 2 0;
#X connect 4 0 3 0;
#X connect 5 0 4 0;
#X connect 6 0 4 0;
#X connect 8 0 3 0;
#X connect 9 0 8 0;
#X connect 9 1 7 0;
#X connect 9 1 6 0;
#X connect 9 2 7 0;
#X coords 0 -1 1 1 145 17 1 250 100;
#X restore 397 320 pd ver;
#X obj 414 393 unpack 0 0;
#X floatatom 414 413 5 0 0 0 - - -;
#X floatatom 471 413 5 0 0 0 - - -;
#X obj 394 455 tgl 15 0 empty empty 0 4 23 1 12 -232448 -1 -1 0 1;
#X obj 411 455 tgl 15 0 empty empty 1 4 23 1 12 -232448 -1 -1 0 1;
#X obj 394 455 cnv 15 15 15 empty empty Rx 1 10 0 11 -128992 -86277
0;
#X obj 411 455 cnv 15 15 15 empty empty Tx 1 10 0 11 -128992 -13381
0;
#X text 436 128 which analogIns to enable:;
#X obj 220 274 arduino 1;
#N canvas 649 518 411 212 firmware 0;
#X obj 123 2 inlet;
#X obj 250 100 cnv 15 145 17 empty \$0-firmware_cnv empty 4 10 0 12
-232576 -66577 0;
#X msg 123 156 label \$1;
#X obj 148 127 symbol;
#X obj 138 101 loadbang;
#X msg 196 102 bang;
#X obj 123 181 send \$0-firmware_cnv;
#X obj 123 24 route firmware;
#X obj 18 181 print Firmware;
#X obj 123 49 list;
#X obj 123 80 zexy/makesymbol %s-%s.%s;
#X obj 18 151 list trim;
#X obj 204 45 route bang;
#X connect 0 0 7 0;
#X connect 2 0 6 0;
#X connect 3 0 2 0;
#X connect 4 0 3 0;
#X connect 5 0 3 0;
#X connect 7 0 9 0;
#X connect 7 1 12 0;
#X connect 9 0 10 0;
#X connect 10 0 2 0;
#X connect 10 0 11 0;
#X connect 11 0 8 0;
#X connect 12 0 5 0;
#X coords 0 -1 1 1 145 17 1 250 100;
#X restore 397 340 pd firmware;
#X msg 358 195 devices;
#X msg 358 175 firmware;
#N canvas 0 22 450 300 STRING 0;
#X obj 48 13 inlet;
#X obj 51 93 moocow/string2any 32 -1;
#X obj 51 154 print STRING;
#X connect 0 0 1 0;
#X connect 1 0 2 0;
#X restore 482 393 pd STRING;
#N canvas 205 22 593 390 strings 0;
#X obj -178 287 outlet;
#X obj -142 101 moocow/any2string;
#X symbolatom -92 48 10 0 0 0 - - -;
#X obj -119 179 pddp/print;
#X obj -92 68 list trim;
#X msg -175 39 test;
#X msg -139 40 TEST;
#X obj -142 130 cyclone/prepend string;
#X obj -313 102 moocow/any2string;
#X symbolatom -263 49 10 0 0 0 - - -;
#X obj -314 202 pddp/print;
#X obj -263 69 list trim;
#X msg -346 40 test;
#X msg -310 41 TEST;
#X obj -313 153 cyclone/prepend sysex;
#X obj -313 131 cyclone/prepend 40;
#X msg 66 117 samplingInterval \$1;
#X obj 69 93 hsl 128 15 0 127 0 0 empty empty empty -2 -8 0 10 -262144
-1 -1 0 1;
#X floatatom 27 117 5 0 0 0 - - -;
#X connect 1 0 7 0;
#X connect 2 0 4 0;
#X connect 4 0 1 0;
#X connect 5 0 1 0;
#X connect 6 0 1 0;
#X connect 7 0 3 0;
#X connect 7 0 0 0;
#X connect 8 0 15 0;
#X connect 9 0 11 0;
#X connect 11 0 8 0;
#X connect 12 0 8 0;
#X connect 13 0 8 0;
#X connect 14 0 0 0;
#X connect 14 0 10 0;
#X connect 15 0 14 0;
#X connect 16 0 0 0;
#X connect 17 0 16 0;
#X connect 17 0 18 0;
#X restore 439 276 pd strings and special messages;
#X obj 397 369 route digital version string sysex;
#X text 397 483 released under the GNU GPL v2 or later;
#X text 436 185 which digital ports to enable:;
#N canvas 162 133 610 460 seri 0;
#X obj 59 337 outlet;
#X obj 59 266 trigger bang anything;
#X obj 201 286 list;
#X obj 60 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 0 5 9 1
12 -260736 -1 -1 1 1;
#X obj 75 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 1 5 9 1
12 -260736 -1 -1 1 1;
#X obj 90 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 2 5 9 1
12 -260736 -1 -1 1 1;
#X msg 35 106 0 \$1;
#X msg 70 106 1 \$1;
#X msg 105 106 2 \$1;
#X msg 202 307 set \$1 \$2 \$3;
#X msg 59 210 digitalIns \$1 \$2;
#X connect 1 0 0 0;
#X connect 1 1 2 0;
#X connect 2 0 9 0;
#X connect 3 0 6 0;
#X connect 4 0 7 0;
#X connect 5 0 8 0;
#X connect 6 0 10 0;
#X connect 7 0 10 0;
#X connect 8 0 10 0;
#X connect 9 0 0 0;
#X connect 10 0 1 0;
#X coords 0 -1 1 1 45 16 1 60 60;
#X restore 437 202 pd seri;
#X text 13 6 The [arduino] object works with the Firmata firmware for
Arduino (also known as Pduino firmware).;
#N canvas 623 75 404 287 device 0;
#X obj 35 60 inlet;
#X obj 35 118 route open port ports;
#X obj 35 169 tgl 15 0 empty empty open -3 20 0 10 -262144 -1 -1 0
1;
#X floatatom 76 170 5 0 0 3 port - -;
#X obj 117 170 print comport_ports;
#X obj 252 170 outlet;
#X obj 235 74 receive ARDUINO_TEST_RESET;
#X obj 235 97 bang;
#X connect 0 0 1 0;
#X connect 1 0 2 0;
#X connect 1 1 3 0;
#X connect 1 2 4 0;
#X connect 1 3 5 0;
#X connect 6 0 7 0;
#X connect 7 0 5 0;
#X restore 397 298 pd device info;
#N canvas 0 22 450 300 sysex 0;
#X obj 139 19 inlet;
#X obj 127 109 moocow/string2any 32 -1;
#X obj 127 170 print STRING;
#X obj 97 55 list split 1;
#X obj 40 109 print COMMAND;
#X obj 210 54 print sysex;
#X connect 0 0 3 0;
#X connect 0 0 5 0;
#X connect 1 0 2 0;
#X connect 3 0 4 0;
#X connect 3 1 1 0;
#X restore 547 393 pd sysex;
#X text 489 298 <- open to see info;
#X text 371 13 turn on output mode for each pin:;
#N canvas 395 421 446 317 pinMode 0;
#X obj 92 267 outlet;
#X obj 122 100 vradio 10 1 0 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
2 2 -8 0 10 -261682 -1 -1 0;
#X obj 132 100 vradio 10 1 0 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
3 2 -8 0 10 -261682 -1 -1 0;
#X obj 142 100 vradio 10 1 0 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
4 2 -8 0 10 -261682 -1 -1 0;
#X obj 152 100 vradio 10 1 0 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
5 2 -8 0 10 -261682 -1 -1 0;
#X obj 162 100 vradio 10 1 0 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
6 2 -8 0 10 -261682 -1 -1 0;
#X obj 172 100 vradio 10 1 0 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
7 2 -8 0 10 -261682 -1 -1 0;
#X obj 182 100 vradio 10 1 0 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
8 2 -8 0 10 -261682 -1 -1 0;
#X obj 192 100 vradio 10 1 0 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
9 2 -8 0 10 -261682 -1 -1 0;
#X obj 202 100 vradio 10 1 0 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
10 0 -8 0 8 -261682 -1 -1 0;
#X obj 212 100 vradio 10 1 0 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
11 0 -8 0 8 -261682 -1 -1 0;
#X obj 222 100 vradio 10 1 0 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
12 0 -8 0 8 -261682 -1 -1 0;
#X obj 232 100 vradio 10 1 0 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
13 0 -8 0 8 -261682 -1 -1 0;
#X obj 242 100 vradio 10 1 1 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
14 0 -8 0 8 -261682 -1 -1 2;
#X obj 252 100 vradio 10 1 1 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
15 0 -8 0 8 -261682 -1 -1 2;
#X obj 262 100 vradio 10 1 1 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
16 0 -8 0 8 -261682 -1 -1 2;
#X obj 272 100 vradio 10 1 1 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
17 0 -8 0 8 -261682 -1 -1 2;
#X obj 282 100 vradio 10 1 1 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
18 0 -8 0 8 -261682 -1 -1 2;
#X obj 292 100 vradio 10 1 1 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
19 0 -8 0 8 -261682 -1 -1 2;
#X obj 302 100 vradio 10 1 1 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
20 0 -8 0 8 -261682 -1 -1 2;
#X obj 312 100 vradio 10 1 1 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
21 0 -8 0 8 -261682 -1 -1 2;
#N canvas 59 587 1064 355 send-to-arduino---------------------- 0;
#X obj 49 24 inlet;
#X obj 89 24 inlet;
#X obj 128 24 inlet;
#X obj 168 24 inlet;
#X obj 208 24 inlet;
#X obj 248 24 inlet;
#X obj 287 24 inlet;
#X obj 327 24 inlet;
#X obj 368 23 inlet;
#X obj 408 23 inlet;
#X obj 447 23 inlet;
#X obj 487 23 inlet;
#X obj 527 23 inlet;
#X msg 49 66 pinMode 0 \$1;
#X msg 89 88 pinMode 1 \$1;
#X msg 128 110 pinMode 2 \$1;
#X msg 168 130 pinMode 3 \$1;
#X msg 208 62 pinMode 4 \$1;
#X msg 248 84 pinMode 5 \$1;
#X msg 287 106 pinMode 6 \$1;
#X msg 327 126 pinMode 7 \$1;
#X msg 368 58 pinMode 8 \$1;
#X msg 408 80 pinMode 9 \$1;
#X msg 447 102 pinMode 10 \$1;
#X msg 487 122 pinMode 11 \$1;
#X msg 527 50 pinMode 12 \$1;
#X obj 566 23 inlet;
#X msg 566 70 pinMode 13 \$1;
#X obj 481 295 outlet;
#X obj 481 256 trigger bang anything;
#X obj 481 209 list prepend set;
#X obj 481 233 list trim;
#X obj 607 23 inlet;
#X obj 647 23 inlet;
#X obj 687 23 inlet;
#X obj 726 23 inlet;
#X obj 767 23 inlet;
#X obj 807 23 inlet;
#X obj 847 23 inlet;
#X obj 886 23 inlet;
#X msg 607 102 pinMode 14 \$1;
#X msg 647 122 pinMode 15 \$1;
#X msg 687 50 pinMode 16 \$1;
#X msg 726 70 pinMode 17 \$1;
#X msg 767 102 pinMode 18 \$1;
#X msg 807 122 pinMode 19 \$1;
#X msg 847 50 pinMode 20 \$1;
#X msg 886 70 pinMode 21 \$1;
#X obj 927 23 inlet;
#X obj 967 23 inlet;
#X msg 927 102 pinMode 22 \$1;
#X msg 967 122 pinMode 23 \$1;
#X connect 0 0 13 0;
#X connect 1 0 14 0;
#X connect 2 0 15 0;
#X connect 3 0 16 0;
#X connect 4 0 17 0;
#X connect 5 0 18 0;
#X connect 6 0 19 0;
#X connect 7 0 20 0;
#X connect 8 0 21 0;
#X connect 9 0 22 0;
#X connect 10 0 23 0;
#X connect 11 0 24 0;
#X connect 12 0 25 0;
#X connect 13 0 30 0;
#X connect 14 0 30 0;
#X connect 15 0 30 0;
#X connect 16 0 30 0;
#X connect 17 0 30 0;
#X connect 18 0 30 0;
#X connect 19 0 30 0;
#X connect 20 0 30 0;
#X connect 21 0 30 0;
#X connect 22 0 30 0;
#X connect 23 0 30 0;
#X connect 24 0 30 0;
#X connect 25 0 30 0;
#X connect 26 0 27 0;
#X connect 27 0 30 0;
#X connect 29 0 28 0;
#X connect 29 1 28 0;
#X connect 30 0 31 0;
#X connect 31 0 29 0;
#X connect 32 0 40 0;
#X connect 33 0 41 0;
#X connect 34 0 42 0;
#X connect 35 0 43 0;
#X connect 36 0 44 0;
#X connect 37 0 45 0;
#X connect 38 0 46 0;
#X connect 39 0 47 0;
#X connect 40 0 30 0;
#X connect 41 0 30 0;
#X connect 42 0 30 0;
#X connect 43 0 30 0;
#X connect 44 0 30 0;
#X connect 45 0 30 0;
#X connect 46 0 30 0;
#X connect 47 0 30 0;
#X connect 48 0 50 0;
#X connect 49 0 51 0;
#X connect 50 0 30 0;
#X connect 51 0 30 0;
#X restore 94 179 pd send-to-arduino----------------------;
#X obj 322 100 vradio 10 1 1 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
22 0 -8 0 8 -261682 -1 -1 2;
#X obj 332 100 vradio 10 1 1 5 THIS_HIDES_THE_OUTLET THIS_HIDES_THE_INLET
23 0 -8 0 8 -261682 -1 -1 2;
#X obj 100 100 cnv 10 10 50 empty empty Rx 0 23 0 10 -191407 -86277
0;
#X obj 111 100 cnv 10 10 50 empty empty Tx 0 23 0 10 -191407 -13381
0;
#X connect 1 0 21 2;
#X connect 2 0 21 3;
#X connect 3 0 21 4;
#X connect 4 0 21 5;
#X connect 5 0 21 6;
#X connect 6 0 21 7;
#X connect 7 0 21 8;
#X connect 8 0 21 9;
#X connect 9 0 21 10;
#X connect 10 0 21 11;
#X connect 11 0 21 12;
#X connect 12 0 21 13;
#X connect 13 0 21 14;
#X connect 14 0 21 15;
#X connect 15 0 21 16;
#X connect 16 0 21 17;
#X connect 17 0 21 18;
#X connect 18 0 21 19;
#X connect 19 0 21 20;
#X connect 20 0 21 21;
#X connect 21 0 0 0;
#X connect 22 0 21 22;
#X connect 23 0 21 23;
#X coords 0 -1 1 1 242 50 2 100 100;
#X restore 319 60 pd pinMode;
#X text 576 95 servo;
#X text 576 85 pwm;
#X text 576 57 input;
#X text 576 66 output;
#X text 576 76 analog;
#N canvas 66 58 423 503 analog 0;
#X obj 38 10 inlet;
#X obj 131 10 inlet;
#X obj 38 259 pack float float;
#X obj 192 113 route float symbol;
#X obj 188 259 pack float symbol;
#X text 78 11 pin#;
#X text 179 10 PWM value or "off";
#X obj 39 217 cyclone/gate 2;
#X msg 191 153 1;
#X msg 252 153 2;
#X obj 131 34 list;
#X obj 131 113 float;
#X obj 131 67 trigger bang anything;
#X obj 37 427 outlet;
#X obj 37 356 trigger bang anything;
#X obj 179 376 list;
#X msg 179 396 set \$1 \$2 \$3;
#X msg 37 308 analog \$1 \$2;
#X connect 0 0 11 0;
#X connect 1 0 10 0;
#X connect 2 0 17 0;
#X connect 3 0 8 0;
#X connect 3 0 2 1;
#X connect 3 1 9 0;
#X connect 3 1 4 1;
#X connect 4 0 17 0;
#X connect 7 0 2 0;
#X connect 7 1 4 0;
#X connect 8 0 7 0;
#X connect 9 0 7 0;
#X connect 10 0 12 0;
#X connect 11 0 7 1;
#X connect 12 0 11 0;
#X connect 12 1 3 0;
#X connect 14 0 13 0;
#X connect 14 1 15 0;
#X connect 15 0 16 0;
#X connect 16 0 13 0;
#X connect 17 0 14 0;
#X restore 31 125 pd analog;
#X text 34 84 (switch pin to PWM or servo first);
#X text 534 252 2.number disable=0 enable=1;
#X text 533 201 1.number=portnumber;
#X text 551 214 PORT0==pins 0-7;
#X text 551 238 PORT2==analog pins;
#X text 551 226 PORT1==pins 8-13;
#X text 434 258 ----------------------------------------------;
#X text 434 177 ----------------------------------------------;
#X connect 3 0 70 0;
#X connect 4 0 3 0;
#X connect 4 1 6 0;
#X connect 6 0 70 0;
#X connect 7 0 91 1;
#X connect 8 0 37 1;
#X connect 9 0 70 0;
#X connect 10 0 70 0;
#X connect 11 0 10 0;
#X connect 19 0 91 0;
#X connect 34 0 70 0;
#X connect 35 0 70 0;
#X connect 36 0 70 0;
#X connect 37 0 44 0;
#X connect 38 0 70 0;
#X connect 39 0 70 0;
#X connect 40 0 39 0;
#X connect 44 0 45 0;
#X connect 44 1 76 0;
#X connect 45 0 46 0;
#X connect 45 1 46 1;
#X connect 45 2 46 2;
#X connect 45 3 46 3;
#X connect 45 4 46 4;
#X connect 45 5 46 5;
#X connect 45 6 46 6;
#X connect 45 7 46 7;
#X connect 46 0 12 0;
#X connect 46 1 13 0;
#X connect 46 2 14 0;
#X connect 46 3 15 0;
#X connect 46 4 16 0;
#X connect 46 5 17 0;
#X connect 46 6 42 0;
#X connect 46 7 43 0;
#X connect 47 2 48 0;
#X connect 47 3 49 0;
#X connect 47 4 50 0;
#X connect 47 5 51 0;
#X connect 47 6 52 0;
#X connect 47 7 53 0;
#X connect 47 8 54 0;
#X connect 47 9 55 0;
#X connect 47 10 56 0;
#X connect 47 11 57 0;
#X connect 47 12 58 0;
#X connect 47 13 59 0;
#X connect 61 0 71 0;
#X connect 62 0 63 0;
#X connect 62 1 64 0;
#X connect 70 0 37 0;
#X connect 70 1 81 0;
#X connect 72 0 70 0;
#X connect 73 0 70 0;
#X connect 75 0 70 0;
#X connect 76 0 47 0;
#X connect 76 1 62 0;
#X connect 76 2 74 0;
#X connect 76 3 82 0;
#X connect 79 0 9 0;
#X connect 81 0 61 0;
#X connect 85 0 38 0;
#X connect 91 0 34 0;

#N canvas 89 22 674 563 10;
#X declare -lib flatspace;
#X obj 558 10 import flatspace;
#N canvas 233 472 466 316 INSTALL-NOTES 0;
#X text 39 201 [comport] \, from pd-cvs/externals/iem/comport;
#X text 39 185 [arduino] \, from pd-cvs/externals/hardware/arduino
;
#X text 39 217 [speedlim] \, from iemlib \, pd-cvs/externals/iemlib
;
#X text 20 27 1 General information on arduino: http://www.arduino.cc
;
#X text 20 61 2 You need the firmware for Pduino: http://at.or.at/hans/pd/objects.html
;
#X text 20 109 3 Don't forget to upload the firmware onto your arduino
board !;
#X text 21 159 4 Pduino needs the following externals and abstractions:
;
#X text 22 257 5 If you still have troubles \, mail to the pd list
!;
#X restore 25 92 pd INSTALL-NOTES;
#X text 150 93 <- read this first !;
#X msg 58 189 close;
#X msg 58 234 info;
#X text 11 149 select/close the serial port:;
#N canvas 248 49 447 555 DIGITAL-OUTPUT 0;
#X text 72 97 I/O the individual pins:;
#X text 20 22 NOTE: don't forget to set pins to output mode first!
;
#X obj 40 194 cnv 15 100 22 empty empty empty 20 12 0 14 -253938 -66577
0;
#X msg 49 197 digital 13 0;
#X obj 168 134 tgl 15 0 empty empty 7 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 185 134 tgl 15 0 empty empty 8 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 202 134 tgl 15 0 empty empty 9 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 219 134 tgl 15 0 empty empty 10 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 236 134 tgl 15 0 empty empty 11 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 253 134 tgl 15 0 empty empty 12 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 270 134 tgl 15 0 empty empty 13 0 -6 1 12 -233017 -1 -1 0 1
;
#X obj 83 134 tgl 15 0 empty empty 2 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 100 134 tgl 15 0 empty empty 3 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 117 134 tgl 15 0 empty empty 5 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 134 134 tgl 15 0 empty empty 6 4 -6 1 12 -233017 -1 -1 0 1;
#X obj 151 134 tgl 15 0 empty empty 7 4 -6 1 12 -233017 -1 -1 0 1;
#N canvas 474 328 810 360 generate 0;
#X obj 49 24 inlet;
#X obj 89 24 inlet;
#X obj 128 24 inlet;
#X obj 168 24 inlet;
#X obj 208 24 inlet;
#X obj 248 24 inlet;
#X obj 287 24 inlet;
#X obj 327 24 inlet;
#X obj 368 23 inlet;
#X obj 408 23 inlet;
#X obj 447 23 inlet;
#X obj 487 23 inlet;
#X obj 527 23 inlet;
#X msg 49 66 digital 0 \$1;
#X msg 89 88 digital 1 \$1;
#X msg 128 110 digital 2 \$1;
#X msg 168 130 digital 3 \$1;
#X msg 208 62 digital 4 \$1;
#X msg 248 84 digital 5 \$1;
#X msg 287 106 digital 6 \$1;
#X msg 327 126 digital 7 \$1;
#X msg 368 58 digital 8 \$1;
#X msg 408 80 digital 9 \$1;
#X msg 447 102 digital 10 \$1;
#X msg 487 122 digital 11 \$1;
#X msg 527 50 digital 12 \$1;
#X obj 566 23 inlet;
#X msg 566 70 digital 13 \$1;
#X obj 305 196 prepend set;
#X obj 305 254 outlet;
#X obj 305 215 trigger bang anything;
#X connect 0 0 13 0;
#X connect 1 0 14 0;
#X connect 2 0 15 0;
#X connect 3 0 16 0;
#X connect 4 0 17 0;
#X connect 5 0 18 0;
#X connect 6 0 19 0;
#X connect 7 0 20 0;
#X connect 8 0 21 0;
#X connect 9 0 22 0;
#X connect 10 0 23 0;
#X connect 11 0 24 0;
#X connect 12 0 25 0;
#X connect 13 0 28 0;
#X connect 14 0 28 0;
#X connect 15 0 28 0;
#X connect 16 0 28 0;
#X connect 17 0 28 0;
#X connect 18 0 28 0;
#X connect 19 0 28 0;
#X connect 20 0 28 0;
#X connect 21 0 28 0;
#X connect 22 0 28 0;
#X connect 23 0 28 0;
#X connect 24 0 28 0;
#X connect 25 0 28 0;
#X connect 26 0 27 0;
#X connect 27 0 28 0;
#X connect 28 0 30 0;
#X connect 30 0 29 0;
#X connect 30 1 29 0;
#X restore 49 158 pd generate digital out messages;
#X obj 319 109 tgl 25 0 empty empty ALL 2 12 0 12 -262144 -1 -1 0 1
;
#X obj 319 70 tgl 15 0 empty empty empty 0 -6 0 8 -225271 -1 -1 0 16383
;
#X obj 319 88 metro 100;
#X obj 49 280 send \$0-arduino;
#X text 143 197 <-- this is the message format;
#X text 181 69 strobe all pins -->;
#X obj 49 134 tgl 15 0 empty empty 0 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 66 134 tgl 15 0 empty empty 1 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 49 134 cnv 15 15 15 empty empty Rx 1 10 0 11 -128992 -86277
0;
#X obj 66 134 cnv 15 15 15 empty empty Tx 1 10 0 11 -128992 -13381
0;
#X obj 49 510 send \$0-arduino;
#X text 38 311 You can also send digital messages 8-bits at a time
\, called a "port". Microcontrollers like the Arduino are organized
around 8-bit ports. This allows you to set 8 pins at the same time
with one message;
#X msg 267 392 port 1 0;
#X msg 123 391 port 0 0;
#X msg 49 391 port 0 255;
#X msg 193 392 port 1 255;
#X connect 3 0 20 0;
#X connect 4 0 16 7;
#X connect 5 0 16 8;
#X connect 6 0 16 9;
#X connect 7 0 16 10;
#X connect 8 0 16 11;
#X connect 9 0 16 12;
#X connect 10 0 16 13;
#X connect 11 0 16 2;
#X connect 12 0 16 3;
#X connect 13 0 16 4;
#X connect 14 0 16 5;
#X connect 15 0 16 6;
#X connect 16 0 3 0;
#X connect 17 0 10 0;
#X connect 17 0 9 0;
#X connect 17 0 8 0;
#X connect 17 0 7 0;
#X connect 17 0 6 0;
#X connect 17 0 5 0;
#X connect 17 0 4 0;
#X connect 17 0 15 0;
#X connect 17 0 14 0;
#X connect 17 0 13 0;
#X connect 17 0 12 0;
#X connect 17 0 11 0;
#X connect 18 0 19 0;
#X connect 19 0 17 0;
#X connect 29 0 27 0;
#X connect 30 0 27 0;
#X connect 31 0 27 0;
#X connect 32 0 27 0;
#X restore 61 428 pd DIGITAL-OUTPUT;
#N canvas 160 139 578 280 DIGITAL-INPUT 0;
#X obj 114 67 r \$0-arduino-out;
#X text 387 93 connect the Digital Input;
#X text 387 110 to the ground (=0) or to;
#X text 387 127 the positive voltage (=1);
#X text 113 185 NOTE: if you don't connect your pin neither to + nor
to the ground \, you will get random values (0 or 1) - to avoid that
\, you could connect all the pins to the ground !;
#X text 114 32 NOTE: don't forget to set pins to input mode first!
;
#X obj 114 89 route digital;
#X obj 114 112 route 0 1 2 3 4 5 6 7 8 9 10 11 12 13;
#X obj 145 134 tgl 15 0 empty empty 2 4 23 1 12 -232448 -1 -1 0 1;
#X obj 162 134 tgl 15 0 empty empty 3 4 23 1 12 -232448 -1 -1 0 1;
#X obj 179 134 tgl 15 0 empty empty 4 4 23 1 12 -232448 -1 -1 0 1;
#X obj 196 134 tgl 15 0 empty empty 5 4 23 1 12 -232448 -1 -1 0 1;
#X obj 213 134 tgl 15 0 empty empty 6 4 23 1 12 -232448 -1 -1 0 1;
#X obj 230 134 tgl 15 0 empty empty 7 4 23 1 12 -232448 -1 -1 0 1;
#X obj 247 134 tgl 15 0 empty empty 8 4 23 1 12 -232448 -1 -1 0 1;
#X obj 264 134 tgl 15 0 empty empty 9 4 23 1 12 -232448 -1 -1 0 1;
#X obj 281 134 tgl 15 0 empty empty 10 0 23 1 12 -232448 -1 -1 0 1
;
#X obj 298 134 tgl 15 0 empty empty 11 0 23 1 12 -232448 -1 -1 0 1
;
#X obj 315 134 tgl 15 0 empty empty 12 0 23 1 12 -232448 -1 -1 0 1
;
#X obj 332 134 tgl 15 0 empty empty 13 0 23 1 12 -232448 -1 -1 0 1
;
#X obj 111 134 tgl 15 0 empty empty 0 4 23 1 12 -232448 -1 -1 0 1;
#X obj 128 134 tgl 15 0 empty empty 1 4 23 1 12 -232448 -1 -1 0 1;
#X obj 111 134 cnv 15 15 15 empty empty Rx 1 10 0 11 -128992 -86277
0;
#X obj 128 134 cnv 15 15 15 empty empty Tx 1 10 0 11 -128992 -13381
0;
#X text 12 134 (serial port)->;
#X connect 0 0 6 0;
#X connect 6 0 7 0;
#X connect 7 2 8 0;
#X connect 7 3 9 0;
#X connect 7 4 10 0;
#X connect 7 5 11 0;
#X connect 7 6 12 0;
#X connect 7 7 13 0;
#X connect 7 8 14 0;
#X connect 7 9 15 0;
#X connect 7 10 16 0;
#X connect 7 11 17 0;
#X connect 7 12 18 0;
#X connect 7 13 19 0;
#X restore 68 404 pd DIGITAL-INPUT;
#X text 531 203 (0=input \, 1=output);
#X obj 551 165 tgl 20 0 empty empty all 1 12 0 11 -261682 -1 -1 0 1
;
#X msg 394 244 pinMode 13 1;
#X text 480 245 set pin 13 to output mode;
#X text 290 149 Set input/output mode of the pins for digital IO:;
#N canvas 268 170 441 343 ANALOG-INPUT 0;
#X obj 121 70 r \$0-arduino-out;
#X obj 121 108 spigot 0;
#X obj 183 105 tgl 20 0 empty empty empty 0 -6 0 8 -258699 -1 -1 0
1;
#X text 30 24 Analog Inputs of the Arduino-Board:;
#X text 211 107 <- enable analog inputs;
#X text 25 283 NOTE: connect the analog pins that you don't use to
the ground \, if you want to avoid flickering of the values !;
#X floatatom 22 226 5 0 0 3 a0 - -;
#X floatatom 68 226 5 0 0 3 a1 - -;
#X floatatom 114 226 5 0 0 3 a2 - -;
#X floatatom 160 226 5 0 0 3 a3 - -;
#X floatatom 206 226 5 0 0 3 a4 - -;
#X floatatom 252 226 5 0 0 3 a5 - -;
#X floatatom 298 226 5 0 0 3 a6 - -;
#X floatatom 344 226 5 0 0 3 a7 - -;
#X obj 121 147 route analog;
#X obj 121 169 route 0 1 2 3 4 5 6 7;
#N canvas 0 22 499 396 display 0;
#X obj 6 7 inlet;
#X obj 6 28 mapping/resample 100;
#X obj 6 50 outlet;
#X obj 54 50 inlet;
#X obj 54 71 mapping/resample 100;
#X obj 54 93 outlet;
#X obj 103 93 inlet;
#X obj 103 114 mapping/resample 100;
#X obj 103 136 outlet;
#X obj 151 136 inlet;
#X obj 151 157 mapping/resample 100;
#X obj 151 179 outlet;
#X obj 200 179 inlet;
#X obj 200 200 mapping/resample 100;
#X obj 200 222 outlet;
#X obj 247 222 inlet;
#X obj 247 243 mapping/resample 100;
#X obj 247 265 outlet;
#X obj 295 265 inlet;
#X obj 295 286 mapping/resample 100;
#X obj 295 308 outlet;
#X obj 345 308 inlet;
#X obj 345 329 mapping/resample 100;
#X obj 345 351 outlet;
#X connect 0 0 1 0;
#X connect 1 0 2 0;
#X connect 3 0 4 0;
#X connect 4 0 5 0;
#X connect 6 0 7 0;
#X connect 7 0 8 0;
#X connect 9 0 10 0;
#X connect 10 0 11 0;
#X connect 12 0 13 0;
#X connect 13 0 14 0;
#X connect 15 0 16 0;
#X connect 16 0 17 0;
#X connect 18 0 19 0;
#X connect 19 0 20 0;
#X connect 21 0 22 0;
#X connect 22 0 23 0;
#X restore 45 200 pd display values without pegging the CPU;
#X connect 0 0 1 0;
#X connect 1 0 14 0;
#X connect 2 0 1 1;
#X connect 14 0 15 0;
#X connect 15 0 16 0;
#X connect 15 1 16 1;
#X connect 15 2 16 2;
#X connect 15 3 16 3;
#X connect 15 4 16 4;
#X connect 15 5 16 5;
#X connect 15 6 16 6;
#X connect 15 7 16 7;
#X connect 16 0 6 0;
#X connect 16 1 7 0;
#X connect 16 2 8 0;
#X connect 16 3 9 0;
#X connect 16 4 10 0;
#X connect 16 5 11 0;
#X connect 16 6 12 0;
#X connect 16 7 13 0;
#X restore 73 452 pd ANALOG-INPUT;
#N canvas 462 480 562 378 ANALOG-OUTPUT-PWM 0;
#X text 16 17 Analog Output \, PWM (Pulse Width Modulation);
#X text 16 53 With the help of PWM you can write analog values to the
pins 9 \, 10 \, 11 of your Arduino board.;
#X text 17 89 NOTE: don't forget to set the pins to output mode first
!;
#X msg 21 189 pwm 9 \$1;
#X obj 24 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2 -6
1 10 -260818 -1 -1 0 1;
#X obj 21 258 s \$0-arduino;
#X text 29 215 disable PWM:;
#X obj 192 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2
-6 1 10 -260818 -1 -1 0 1;
#X obj 189 258 s \$0-arduino;
#X text 197 215 disable PWM:;
#X obj 354 168 hsl 150 17 0 1 0 0 empty empty PWM_control_(0-1) -2
-6 1 10 -260818 -1 -1 0 1;
#X obj 351 258 s \$0-arduino;
#X text 359 215 disable PWM:;
#X text 21 133 PIN9:;
#X text 189 135 PIN10:;
#X text 351 135 PIN11:;
#X msg 189 189 pwm 10 \$1;
#X msg 351 189 pwm 11 \$1;
#X text 21 319 NOTE: it is possible to write as well on the other pins
to send software-PWM signals (will come soon ...);
#X msg 31 234 pwm 9 0;
#X msg 199 234 pwm 10 0;
#X msg 361 234 pwm 11 0;
#X connect 3 0 5 0;
#X connect 4 0 3 0;
#X connect 7 0 16 0;
#X connect 10 0 17 0;
#X connect 16 0 8 0;
#X connect 17 0 11 0;
#X connect 19 0 5 0;
#X connect 20 0 8 0;
#X connect 21 0 11 0;
#X restore 43 477 pd ANALOG-OUTPUT-PWM;
#X text 25 357 With the Arduino-Board you can do digital and analog
input and output \, as descriped in the following sub-patches:;
#X text 191 427 <- example of Digital Output;
#X text 191 405 <- example of Digital Input;
#X text 191 453 <- example of Analog Input;
#X text 191 478 <- example of Analog Output;
#X text 259 30 Arduino Interface For PD;
#X text 286 4 ::::_PDUINO_::::;
#X text 468 517 2006 \, released under GNU GPL \; Gerda Strobl \, Georg
Holzmann;
#X text 111 261 <- list devices;
#X obj 295 318 send \$0-arduino;
#X obj 476 111 send \$0-arduino-out;
#X obj 476 67 receive \$0-arduino;
#X obj 16 314 send \$0-arduino;
#N canvas 0 22 436 343 GETTING-INFO 0;
#X msg 147 65 version;
#X msg 207 65 info;
#X obj 146 177 route version;
#X floatatom 146 245 5 0 0 0 - - -;
#X floatatom 251 245 5 0 0 0 - - -;
#X obj 146 146 receive \$0-arduino-out;
#X obj 147 107 send \$0-arduino;
#X obj 146 221 unpack float float;
#X connect 0 0 6 0;
#X connect 1 0 6 0;
#X connect 2 0 7 0;
#X connect 5 0 2 0;
#X connect 7 0 3 0;
#X connect 7 1 4 0;
#X restore 73 501 pd GETTING-INFO;
#X text 191 502 <- example of getting status data;
#N canvas 230 523 557 268 SWITCHING-INPUTS 1;
#X obj 140 155 send \$0-arduino;
#X obj 451 59 tgl 15 1 empty empty empty 0 -6 0 8 -257472 -1 -1 0 1
;
#X text 274 43 enable/disable digitalIns;
#X msg 451 77 digitalIns \$1;
#X msg 25 83 analogIns 0 0;
#N canvas 162 133 610 460 serin 0;
#X obj 59 337 outlet;
#X obj 59 266 trigger bang anything;
#X obj 201 286 list;
#X obj 60 61 tgl 15 0 junk_to_hide_inlet junk_to_hide_outlet 0 5 9
1 12 -262130 -1 -1 0 1;
#X obj 75 61 tgl 15 0 junk_to_hide_inlet junk_to_hide_outlet 1 5 9
1 12 -262130 -1 -1 0 1;
#X obj 90 61 tgl 15 0 junk_to_hide_inlet junk_to_hide_outlet 2 5 9
1 12 -262130 -1 -1 0 1;
#X obj 105 61 tgl 15 0 junk_to_hide_inlet junk_to_hide_outlet 3 5 9
1 12 -262130 -1 -1 0 1;
#X obj 120 61 tgl 15 0 junk_to_hide_inlet junk_to_hide_outlet 4 5 9
1 12 -262130 -1 -1 0 1;
#X obj 135 61 tgl 15 0 junk_to_hide_inlet junk_to_hide_outlet 5 5 9
1 12 -262130 -1 -1 0 1;
#X obj 150 61 tgl 15 0 junk_to_hide_inlet junk_to_hide_outlet 6 5 9
1 12 -262130 -1 -1 0 1;
#X obj 165 61 tgl 15 0 junk_to_hide_inlet junk_to_hide_outlet 7 5 9
1 12 -262130 -1 -1 0 1;
#X msg 59 210 analogIns \$1 \$2;
#X msg 35 106 0 \$1;
#X msg 70 106 1 \$1;
#X msg 105 106 2 \$1;
#X msg 140 106 3 \$1;
#X msg 175 106 4 \$1;
#X msg 210 106 5 \$1;
#X msg 245 106 6 \$1;
#X msg 280 106 7 \$1;
#X msg 202 307 set \$1 \$2 \$3;
#X connect 1 0 0 0;
#X connect 1 1 2 0;
#X connect 2 0 20 0;
#X connect 3 0 12 0;
#X connect 4 0 13 0;
#X connect 5 0 14 0;
#X connect 6 0 15 0;
#X connect 7 0 16 0;
#X connect 8 0 17 0;
#X connect 9 0 18 0;
#X connect 10 0 19 0;
#X connect 11 0 1 0;
#X connect 12 0 11 0;
#X connect 13 0 11 0;
#X connect 14 0 11 0;
#X connect 15 0 11 0;
#X connect 16 0 11 0;
#X connect 17 0 11 0;
#X connect 18 0 11 0;
#X connect 19 0 11 0;
#X connect 20 0 0 0;
#X coords 0 -1 1 1 120 16 1 60 60;
#X restore 25 63 pd serin;
#X text 24 46 which analogIns to enable:;
#X text 274 153 2.number disable=0 enable=1;
#X text 273 98 1.number=portnumber;
#X text 291 111 PORT0==pins 0-7;
#X text 291 135 PORT2==analog pins;
#X text 291 123 PORT1==pins 8-13;
#N canvas 162 133 610 460 seri 0;
#X obj 59 337 outlet;
#X obj 59 266 trigger bang anything;
#X obj 201 286 list;
#X obj 60 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 0 5 9 1
12 -260736 -1 -1 0 1;
#X obj 75 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 1 5 9 1
12 -260736 -1 -1 0 1;
#X obj 90 61 tgl 15 0 junk_to_hide_inlet ARDUINO_TEST_RESET 2 5 9 1
12 -260736 -1 -1 0 1;
#X msg 35 106 0 \$1;
#X msg 70 106 1 \$1;
#X msg 105 106 2 \$1;
#X msg 202 307 set \$1 \$2 \$3;
#X msg 59 210 digitalIns \$1 \$2;
#X connect 1 0 0 0;
#X connect 1 1 2 0;
#X connect 2 0 9 0;
#X connect 3 0 6 0;
#X connect 4 0 7 0;
#X connect 5 0 8 0;
#X connect 6 0 10 0;
#X connect 7 0 10 0;
#X connect 8 0 10 0;
#X connect 9 0 0 0;
#X connect 10 0 1 0;
#X coords 0 -1 1 1 45 16 1 60 60;
#X restore 275 59 pd seri;
#X msg 275 78 digitalIns 2 1;
#X connect 1 0 3 0;
#X connect 4 0 0 0;
#X connect 5 0 4 0;
#X connect 12 0 13 0;
#X connect 13 0 0 0;
#X restore 49 526 pd SWITCHING-INPUTS;
#X text 191 526 <- example of switching inputs on and off;
#X msg 394 283 digital 13 \$1;
#X obj 394 265 tgl 15 0 empty empty empty 0 -6 0 8 -262144 -1 -1 0
1;
#X text 480 283 toggle pin 13 on and off;
#X obj 476 90 arduino 1;
#X msg 58 260 devices;
#X text 92 234 <- info for current connection;
#X obj 329 185 tgl 15 0 empty empty 2 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 346 185 tgl 15 0 empty empty 3 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 363 185 tgl 15 0 empty empty 4 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 380 185 tgl 15 0 empty empty 5 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 397 185 tgl 15 0 empty empty 6 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 414 185 tgl 15 0 empty empty 7 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 431 185 tgl 15 0 empty empty 8 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 448 185 tgl 15 0 empty empty 9 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 465 185 tgl 15 0 empty empty 10 0 -6 1 12 -260818 -1 -1 0 1
;
#X obj 482 185 tgl 15 0 empty empty 11 0 -6 1 12 -260818 -1 -1 0 1
;
#X obj 499 185 tgl 15 0 empty empty 12 0 -6 1 12 -260818 -1 -1 0 1
;
#X obj 516 185 tgl 15 0 empty empty 13 0 -6 1 12 -260818 -1 -1 0 1
;
#X msg 295 226 pinMode 13 1;
#N canvas 163 104 696 323 send-to-arduino------------------- 0;
#X obj 49 24 inlet;
#X obj 89 24 inlet;
#X obj 128 24 inlet;
#X obj 168 24 inlet;
#X obj 208 24 inlet;
#X obj 248 24 inlet;
#X obj 287 24 inlet;
#X obj 327 24 inlet;
#X obj 368 23 inlet;
#X obj 408 23 inlet;
#X obj 447 23 inlet;
#X obj 487 23 inlet;
#X obj 527 23 inlet;
#X msg 49 66 pinMode 0 \$1;
#X msg 89 88 pinMode 1 \$1;
#X msg 128 110 pinMode 2 \$1;
#X msg 168 130 pinMode 3 \$1;
#X msg 208 62 pinMode 4 \$1;
#X msg 248 84 pinMode 5 \$1;
#X msg 287 106 pinMode 6 \$1;
#X msg 327 126 pinMode 7 \$1;
#X msg 368 58 pinMode 8 \$1;
#X msg 408 80 pinMode 9 \$1;
#X msg 447 102 pinMode 10 \$1;
#X msg 487 122 pinMode 11 \$1;
#X msg 527 50 pinMode 12 \$1;
#X obj 566 23 inlet;
#X msg 566 70 pinMode 13 \$1;
#X obj 305 282 outlet;
#X obj 305 243 trigger bang anything;
#X obj 305 196 list prepend set;
#X obj 305 220 list trim;
#X connect 0 0 13 0;
#X connect 1 0 14 0;
#X connect 2 0 15 0;
#X connect 3 0 16 0;
#X connect 4 0 17 0;
#X connect 5 0 18 0;
#X connect 6 0 19 0;
#X connect 7 0 20 0;
#X connect 8 0 21 0;
#X connect 9 0 22 0;
#X connect 10 0 23 0;
#X connect 11 0 24 0;
#X connect 12 0 25 0;
#X connect 13 0 30 0;
#X connect 14 0 30 0;
#X connect 15 0 30 0;
#X connect 16 0 30 0;
#X connect 17 0 30 0;
#X connect 18 0 30 0;
#X connect 19 0 30 0;
#X connect 20 0 30 0;
#X connect 21 0 30 0;
#X connect 22 0 30 0;
#X connect 23 0 30 0;
#X connect 24 0 30 0;
#X connect 25 0 30 0;
#X connect 26 0 27 0;
#X connect 27 0 30 0;
#X connect 29 0 28 0;
#X connect 29 1 28 0;
#X connect 30 0 31 0;
#X connect 31 0 29 0;
#X restore 295 204 pd send-to-arduino-------------------;
#X obj 295 185 tgl 15 0 empty empty 0 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 312 185 tgl 15 0 empty empty 1 3 -6 1 12 -260818 -1 -1 0 1;
#X obj 295 185 cnv 15 15 15 empty empty Rx 1 10 0 11 -128992 -86277
0;
#X obj 312 185 cnv 15 15 15 empty empty Tx 1 10 0 11 -128992 -13381
0;
#X text 291 91 here is our Arduino object -->;
#X msg 58 286 version;
#X text 110 286 <- get firmware version;
#X msg 11 189 open 1;
#N canvas 627 365 360 384 serin 0;
#X obj 180 61 cnv 15 15 15 empty \$0-number-canvas 1 4 8 0 14 -233017
-1 0;
#X obj 200 225 s \$0-number-canvas;
#X obj 60 61 hradio 15 1 1 8 empty empty empty 0 -6 0 8 -225271 -1
-1 1;
#X obj 60 13 inlet;
#X msg 200 202 label \$1;
#X obj 200 180 makefilename %d;
#X obj 59 108 int;
#X msg 59 206 open \$1;
#X obj 59 337 outlet;
#X msg 201 306 set \$1 \$2;
#X obj 59 266 trigger bang anything;
#X obj 201 286 list;
#X connect 2 0 6 0;
#X connect 3 0 2 0;
#X connect 4 0 1 0;
#X connect 5 0 4 0;
#X connect 6 0 5 0;
#X connect 6 0 7 0;
#X connect 7 0 10 0;
#X connect 9 0 8 0;
#X connect 10 0 8 0;
#X connect 10 1 11 0;
#X connect 11 0 9 0;
#X coords 0 -1 1 1 136 17 1 60 60;
#X restore 11 166 pd serin;
#N canvas 0 22 467 240 ver 0;
#X obj 250 100 cnv 15 145 17 empty \$0-version_cnv empty 4 10 0 12
-203904 -1 0;
#X obj 23 157 send \$0-version_cnv;
#X msg 23 132 label \$1;
#X obj 23 52 zexy/makesymbol firmata_version_%s.%s;
#X obj 48 103 symbol;
#X obj 38 77 loadbang;
#X msg 96 78 bang;
#X obj 23 29 route version;
#X obj 23 6 receive \$0-arduino-out;
#X connect 2 0 1 0;
#X connect 3 0 2 0;
#X connect 4 0 2 0;
#X connect 5 0 4 0;
#X connect 6 0 4 0;
#X connect 7 0 3 0;
#X connect 8 0 7 0;
#X coords 0 -1 1 1 145 17 1 250 100;
#X restore 125 314 pd ver;
#X text 201 185 (serial port)->;
#X connect 3 0 27 0;
#X connect 4 0 27 0;
#X connect 9 0 49 0;
#X connect 9 0 48 0;
#X connect 9 0 47 0;
#X connect 9 0 46 0;
#X connect 9 0 45 0;
#X connect 9 0 44 0;
#X connect 9 0 43 0;
#X connect 9 0 42 0;
#X connect 9 0 41 0;
#X connect 9 0 40 0;
#X connect 9 0 39 0;
#X connect 9 0 38 0;
#X connect 10 0 24 0;
#X connect 26 0 35 0;
#X connect 32 0 24 0;
#X connect 33 0 32 0;
#X connect 35 0 25 0;
#X connect 36 0 27 0;
#X connect 38 0 51 2;
#X connect 39 0 51 3;
#X connect 40 0 51 4;
#X connect 41 0 51 5;
#X connect 42 0 51 6;
#X connect 43 0 51 7;
#X connect 44 0 51 8;
#X connect 45 0 51 9;
#X connect 46 0 51 10;
#X connect 47 0 51 11;
#X connect 48 0 51 12;
#X connect 49 0 51 13;
#X connect 50 0 24 0;
#X connect 51 0 50 0;
#X connect 57 0 27 0;
#X connect 59 0 27 0;
#X connect 60 0 59 0;

_______________________________________________
[email protected] mailing list
UNSUBSCRIBE and account-management -> 
http://lists.puredata.info/listinfo/pd-list

Re: [PD] pduino digital read problems

Reply via email to