I also forgot to mention that this issue was mentioned on this list before.
there is a link for a firmata firmware made for the mega from the made by the teensy guy. http://www.pjrc.com/tmp/firmata/ check the list in here http://www.mail-archive.com/[email protected]/msg31148.html 2010/5/19 Ricardo Lameiro <[email protected]> > As far as I know, the pduino is not made for the arduino mega. so it could > work, but you need to test it out. also the firmata firmware would need also > some tweak since the mega has more outputs/inputs and analog ports > > 2010/5/19 Andres Ferrari <[email protected]> > >> hello, >> When I use the abstraction [arduino] or [comport] object >> the numbers of the digital outputs (pins) of the arduino hardware >> don't match with the output's numbers of the patch. >> >> for example, when i send 1 to digital output "12" from puredata the led >> connected to digital out 12 don't turn on but ...but turn on in digital out >> "14"... >> >> only works pins from 10- 13 but 0- 9 dont't work. >> >> When I've tested from the arduino's software with a sketch there aren't >> any problem, all works fine. >> >> Is it a [comport]r or "Firmata" problem? >> I have osx 10.5 and arduino mega. >> >> Any suggestions?.....thanks a lot!!! >> >> >> Andrés Ferrari G. >> >> http://www.myspace.com/anfex >> >> >> _______________________________________________ >> [email protected] mailing list >> UNSUBSCRIBE and account-management -> >> http://lists.puredata.info/listinfo/pd-list >> >> > > > -- > Fagote / Contrafagote > Bassoon / Contra-bassoon > http://myspace.com/ricardolameiro > -- Fagote / Contrafagote Bassoon / Contra-bassoon http://myspace.com/ricardolameiro
_______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
