Hi Cyrille and Mathieu, debounce (IMHE) only retards (delay) the multiples bangs in particular time(, I need to receive only one and locks, no more bangs, then you can reactivate such a delay, so you can return to a zero point and repeat a sequence, video or sound and does not occur jumpcut.
Thanks again friends José Escuchar Leer fonéticamente 2010/11/12 Mathieu Bouchard <ma...@artengine.ca> > On Fri, 12 Nov 2010, Jose Luis Santorcuato wrote: > > Hi all, I'm working for a long time to solve the multiple bangs that >> sometimes I throw some devices, I tested debounce, edge, but I can not >> control the multiplicity of bangs or Toogle, I can retard or miss one, send >> it to the right ( edge) but I can not control multiple bangs or toggle. Any >> ideas? >> > > use a [f] with a [metro] to make a steady stream of 0 and 1 values. Then > make a low-pass filter by combining [+] [* 0.9] and [* 0.1] so that the > output of the filter is 10 % of the current input plus 90 % of the previous > input. Then use a threshold such as [>= 0.5]. > > You can control the intensity of the debounce by changing the constants 0.9 > and 0.1 as long as they add up to 1 and that both are positive. You can also > change the speed of the [metro]. > > _______________________________________________________________________ > | Mathieu Bouchard ---- tél: +1.514.383.3801 ---- Villeray, Montréal, QC > -- http://arselectronicachile.blogspot.com http://comunicacionnativa.blogspot.com/ http://www.myspace.com/santorcuato
_______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list