Hi
if you're running on Linux check the [ADDITIONAL-INFOS] in the arduino-help.pd on the upper right corner in the
pd-rewrite: https://github.com/reduzent/pduino
as mentioned below the infos you'll find there are basically from
http://answers.ros.org/answers/101/revisions/
with this method you can connect the arduino within pd due to its serial adress
avoiding id-conflicts.
hope this helps
ΓΈ
On 09/06/2011 09:27 PM, tim vets wrote:
We have an installation running at www.verbekefoundation.com
<http://www.verbekefoundation.com> with two arduino's and
pd for several years now.
The only thing that fries now and then are the power supplies.
iirc, it's just a matter of sending the right [devicename <name_of_device>( to
the two [comport], ( or [arduino] ?) objects.
You can get those devicenames by doing "ls /dev/ttyU*", which will give you
something like /dev/ttyUSB0 and
/dev/ttyUSB1, representing the two arduino's.
(under the assumption that the newer arduino models still work the same way.)
gr,
Tim
2011/9/6 FernandoG <[email protected] <mailto:[email protected]>>
Hi
Anybody knows if its posible to use multiple arduinos ( 2 or 3 arduino
mega) with the same pduino based puredata patch?
Thanks!
F
_______________________________________________
[email protected] <mailto:[email protected]> mailing list
UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
_______________________________________________
[email protected] mailing list
UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
--
ETs DNA will not be televised
http://hasa-labs.org
_______________________________________________
[email protected] mailing list
UNSUBSCRIBE and account-management ->
http://lists.puredata.info/listinfo/pd-list
