hello,

i made more tests :
minicom works perfectly for both TX and RX. so the serial communication works.
but I still have problem with comport.
sending is ok, but it receiving did not work correctly :

connecting TX and RX, sending on Byte and looking with an oscilloscope, i can 
see that the value is send over and over, and comport did never receive it.

slowing down the pooling speed help a bit : i can receive few bytes, but not in 
the order I send them, and most are lost. pd hang a lot, and connection crash 
often.

i'm using comport from svn (version 0.2), and pd 0.44.1
what version are you using?

according to what i see in pduino, nothing special is made to configure the 
connection, so things should just work.

cheers
c


Le 28/01/2013 10:49, Pierre Massat a écrit :
Hi, I didn't do anything special, i just installed comport and other 
dependencies for pduino, and plugged my Arduino Uno. It appeared as device 0 
(can't tell you about /dev/ttyAMA0).


Cheers,

Pierre.

2013/1/28 Cyrille Henry <c...@chnry.net <mailto:c...@chnry.net>>

    hello,

    cool.
    did you do anything special?
    did you also use /dev/ttyAMA0 or something else?

    cheers
    c


    Le 28/01/2013 09:24, Pierre Massat a écrit :

        Comport works fine for me on the Pi with an Arduino and Firmata.

        Cheers,

        Pierre.

        2013/1/28 Hans-Christoph Steiner <h...@at.or.at <mailto:h...@at.or.at> 
<mailto:h...@at.or.at <mailto:h...@at.or.at>>>



             [comport] is quite thoroughly tested so I would be surprised if it 
is the
             problem. Wini Ritsch, IOhannes, Martin Peach, and I (maybe others) 
have all
             worked on it quite a bit.  It might be the question of what format 
the data is
             in.  what is /dev/ttyANA0?  Usually [comport] is used with 
/dev/ttyS and
             /dev/ttyUSB.

             .hc

             On 01/27/2013 01:16 PM, Cyrille Henry wrote:
              > hello,
              >
              > i try the comport object on raspberry pi.
              > it can send perfectly, but receiving data hang pd.
              > data can be seen using :
              > cat /dev/ttyANA0
              > so it's not a problem with the pi.
              >
              > is there any other object to receive serial data?
              >
              > thanks
              > Cyrille
              >
              > _________________________________________________
              > Pd-list@iem.at <mailto:Pd-list@iem.at> <mailto:Pd-list@iem.at 
<mailto:Pd-list@iem.at>> mailing list

              > UNSUBSCRIBE and account-management -> 
http://lists.puredata.info/__listinfo/pd-list 
<http://lists.puredata.info/listinfo/pd-list>

             _________________________________________________
        Pd-list@iem.at <mailto:Pd-list@iem.at> <mailto:Pd-list@iem.at 
<mailto:Pd-list@iem.at>> mailing list

             UNSUBSCRIBE and account-management -> 
http://lists.puredata.info/__listinfo/pd-list 
<http://lists.puredata.info/listinfo/pd-list>




        _________________________________________________
        Pd-list@iem.at <mailto:Pd-list@iem.at> mailing list
        UNSUBSCRIBE and account-management -> 
http://lists.puredata.info/__listinfo/pd-list 
<http://lists.puredata.info/listinfo/pd-list>



_______________________________________________
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -> 
http://lists.puredata.info/listinfo/pd-list

Reply via email to